ENAStarbie
Hobbes-2·ENAStarbie·PCB/Starbie.kicad_pcb
About the ENAStarbie PCB
ENAStarbie is an open source ESP32 PCB design by Hobbes-2, published on GitHub. It is a 2-layer board measuring 50 × 75.1 mm, with 9 components from 7 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 3 switches, 2 ICs, 2 connectors and 2 resistors.
From the project
This project builds off of the basic Starbie tutorial with a focus on the game ENA: Dream BBQ. (In case you cant tell, ive been playing it). This is for week 1 of Hackclub Half Life.
This project builds off of the basic Starbie tutorial with a focus on the game ENA: Dream BBQ. (In case you cant tell, ive been playing it). This is for week 1 of Hackclub Half Life.
Its a fairly simple tamogatchi-esque PCB with two keys, a display, a MPU6050, an on-off switch, all running off of an ESP32.
This project is meant to serve as a useful tool to get back into PCB making, as Ive been slacking quite a bit when it comes to hardware. I hope that itll encourage me to keep doing the next weeks of Halflife, and Ill actually build good habits and gain knowledge about electrical circuts…
Main components on the ENAStarbie
ENAStarbie bill of materials (BOM)
9 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C3-SMD | U1 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | Conn_01x04_Pin | Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | SW_SPDT | PinHeader_1x03_P2.54mm_Horizontal | SW3 |
| 2 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
ENAStarbie design files
The KiCad project lives in the Hobbes-2/ENAStarbie repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Starbie.kicad_pcb
- SchematicPCB/Starbie.kicad_sch
ENAStarbie: common questions
What microcontroller does the ENAStarbie use?
The ENAStarbie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the ENAStarbie PCB?
The ENAStarbie measures 50 × 75.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ENAStarbie?
9 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the ENAStarbie design files?
From the Hobbes-2/ENAStarbie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ENAStarbie design in my own project?
The repository has no license, so all rights stay with Hobbes-2. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ENAStarbie without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k