STM32 watch NFC

HolTyc·STM32_watch_NFC·PCB/STM32_watch_NFC/STM32_watch_NFC.kicad_pcb

STM32 watch NFC PCB layout, top view — open source STM32 board by HolTyc

About the STM32 watch NFC PCB

STM32 watch NFC is an open source STM32 PCB design by HolTyc, published on GitHub. It is a 4-layer board measuring 37 × 37 mm, with 126 components from 46 distinct parts.

Its main chip is the STM32L031G6UX, from the STM32 family. Other key parts include the BH1750FVI, 74AHCT1G125, LP5912-3.3DRV, MCP73831-3-OT and MT3608. By type, the board carries 41 diodes, 36 capacitors, 26 resistors, 8 ICs, 4 transistors and 3 switches.

It belongs with the wearables, displays & leds and power & battery designs in this gallery.

From the project

Watch using STM32 with LED 7-segment display and RGB display

A smartwatch designed and engineered from scratch by Czech students. This is a hobby project intended to help others build their own PCB-based watches.

- Analog clock — 12 addressable RGB LEDs (WS2812B) arranged in a clock ring - Digital clock — HH:MM shown on a custom 7-segment display built using Charlieplexing (6 GPIO pins drive a 4-digit matrix with no external drivers) - Wrist-wake — BMA400 accelerometer detects wrist raise, wakes the watch from sleep - Auto-brightness — BH1750FVI ambient light sensor adjusts LED brightness automatically - 6 color themes — cycle through hour/minute…

STM32 watch NFC, from the project README
From the project README

Main components on the STM32 watch NFC

STM32 watch NFC bill of materials (BOM)

126 components, 46 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BH1750FVI
BH1750FVI-TR
U1
1
74AHCT1G125
U2
1
STM32L031G6UX
STM32L031G6Ux
U3
1
LP5912-3.3DRV
TPS63802DLAR
U4
1
MCP73831-3-OT
U5
1
MT3608
TPS61235PRWLR
U6
1
LMS33460MG
U7
1
BMA400
U8
1
BC817
Q1
1
AO3400A
YJQ10N02A
Q2
1
LP2317DT2AG
Q3
1
YJQ10N02A
Q4
1
32.768KHZ
32.768kHz
Y1
1
CONN_01X06_SOCKET
Conn_01x06_Socket
J1
1
USB_C_Plug_USB2.0
P1
1
C95299
Buzzer
BZ1
1
Conn_01x02_Socket
Li-po1
3
SW_DPST_X2
SW_DPST_x2
SW1, SW2, SW3
12
SK6805
D1, D2, D3, D4, D5, D6, D7, D8 +4
28
LED
D13, D14, D15, D16, D17, D18, D19, D20 +20
Show 26 more
QtyPartRefs
1
C727120
D_Schottky
D43
1
C1002
FerriteBead
FB1
1
22UH
1uH
L1
1
0.47uH
L2
18
100N
100n
C1, C3, C4, C6, C7, C11, C14, C15 +10
3
1u
C2, C9, C10
3
10U
10u
C5, C26, C31
1
10N
10n
C8
2
15PF
15pF
C12, C13
1
10u
C27
3
22u
C28, C33, C34
2
4.7UF
4.7uF
C29, C30
1
10U
22u
C32
2
100n
C35, C36
1
100k
R1
2
511k
R2, R26
3
16.5K
R3, R5, R7
4
510
R4, R6, R9, R11
1
5K1
510
R8
6
10K
R10, R13, R14, R17, R20, R21
1
91k
R12
3
5K1
R15, R16, R19
1
16.5K
511k
R18
1
2.2K
511k
R22
1
2.2K
R23
2
2.2K
R24, R25

STM32 watch NFC design files

The KiCad project lives in the HolTyc/STM32_watch_NFC repository on GitHub; these links point at the commit this page was built from.

STM32 watch NFC: common questions

What microcontroller does the STM32 watch NFC use?

The STM32 watch NFC is built around the STM32L031G6UX, from the STM32 family.

How big is the STM32 watch NFC PCB?

The STM32 watch NFC measures 37 × 37 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the STM32 watch NFC?

126 components, from 46 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32 watch NFC design files?

From the HolTyc/STM32_watch_NFC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the STM32 watch NFC design in my own project?

The repository has no license, so all rights stay with HolTyc. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32 watch NFC without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in STM32_watch_NFC

Similar boards