Panelized watch

HolTyc·STM32_watch_NFC·PCB/Panelized_watch/Panelized_watch/Panelized_watch.kicad_pcb

Panelized watch PCB layout, top view — open source STM32 board by HolTyc

About the Panelized watch PCB

Panelized watch is an open source STM32 PCB design by HolTyc, published on GitHub. It is a 4-layer board measuring 70 × 92 mm, with 125 components from 38 distinct parts.

Its main chip is the STM32L031G6UX, from the STM32 family. Other key parts include the BH1750FVI, 74AHCT1G125, TPS63802DLAR, MCP73831-3-OT and TPS61235PRWLR. By type, the board carries 41 diodes, 36 capacitors, 25 resistors, 8 ICs, 4 transistors and 3 switches.

It belongs with the wearables, displays & leds and power & battery designs in this gallery.

From the project

Watch using STM32 with LED 7-segment display and RGB display

A smartwatch designed and engineered from scratch by Czech students. This is a hobby project intended to help others build their own PCB-based watches.

- Analog clock — 12 addressable RGB LEDs (WS2812B) arranged in a clock ring - Digital clock — HH:MM shown on a custom 7-segment display built using Charlieplexing (6 GPIO pins drive a 4-digit matrix with no external drivers) - Wrist-wake — BMA400 accelerometer detects wrist raise, wakes the watch from sleep - Auto-brightness — BH1750FVI ambient light sensor adjusts LED brightness automatically - 6 color themes — cycle through hour/minute…

Panelized watch, from the project README
From the project README

Main components on the Panelized watch

Panelized watch bill of materials (BOM)

125 components, 38 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BH1750FVI
BH1750FVI-TR
U1
1
74AHCT1G125
U2
1
STM32L031G6UX
STM32L031G6Ux
U3
1
TPS63802DLAR
U4
1
MCP73831-3-OT
U5
1
TPS61235PRWLR
U6
1
LMS33460MG
U7
1
BMA400
U8
1
BC817
Q1
2
YJQ10N02A
Q2, Q4
1
LP2317DT2AG
Q3
1
32.768KHZ
32.768kHz
Y1
1
CONN_01X06_SOCKET
Conn_01x06_Socket
J1
1
USB_C_PLUG_USB2.0
USB_C_Plug_USB2.0
P1
1
C95299
Buzzer
BZ1
1
Conn_01x02_Socket
Li-po1
3
SW_DPST_X2
SW_DPST_x2
SW1, SW2, SW3
12
SK6805
D1, D2, D3, D4, D5, D6, D7, D8 +4
28
LED
D13, D14, D15, D16, D17, D18, D19, D20 +20
1
C727120
D_Schottky
D43
Show 18 more
QtyPartRefs
1
C1002
FerriteBead
FB1
1
1UH
1uH
L1
1
0.47UH
0.47uH
L2
20
100N
100n
C1, C3, C4, C6, C7, C11, C14, C15 +12
3
1u
C2, C9, C10
4
10U
10u
C5, C26, C27, C31
1
10N
10n
C8
2
15PF
15pF
C12, C13
4
22U
22u
C28, C32, C33, C34
2
4.7UF
4.7uF
C29, C30
1
100K
100k
R1
4
511K
511k
R2, R18, R22, R26
3
16.5K
R3, R5, R7
5
510
R4, R6, R8, R9, R11
5
10K
R10, R13, R14, R17, R20
1
91K
91k
R12
3
5K1
R15, R16, R19
3
2.2K
R23, R24, R25

Panelized watch design files

The KiCad project lives in the HolTyc/STM32_watch_NFC repository on GitHub; these links point at the commit this page was built from.

Panelized watch: common questions

What microcontroller does the Panelized watch use?

The Panelized watch is built around the STM32L031G6UX, from the STM32 family.

How big is the Panelized watch PCB?

The Panelized watch measures 70 × 92 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Panelized watch?

125 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Panelized watch design files?

From the HolTyc/STM32_watch_NFC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Panelized watch design in my own project?

The repository has no license, so all rights stay with HolTyc. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Panelized watch without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in STM32_watch_NFC

Similar boards