Aqproto
HOUXA8·aqproto
About the Aqproto PCB
Aqproto is an open source ESP32 PCB design by HOUXA8, published on GitHub. It is a 4-layer board measuring 25.5 × 62.8 mm, with 31 components from 19 distinct parts.
Its main chip is the ESP32-S3-MINI-1-N8, from the ESP32 family. Other key parts include the D3V3XA4B10LP-7, TLV75801PDRVT, ENS210-LQFM, SCD41-D-R2 and SGP41-D-R3. By type, the board carries 9 capacitors, 9 resistors, 6 ICs, 2 connectors and 2 diodes.
It belongs with the sensors designs in this gallery.
From the project
Personal Project
Air quality monitoring prototype with NOx, CO2, VOC, temperature, & humidity sensors. Chip used is ESP32-S3-MINI-1-N8
Main components on the Aqproto
Aqproto bill of materials (BOM)
31 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-MINI-1-N8 | XCVR_ESP32-S3-MINI-1-N8 | U1 |
| 1 | D3V3XA4B10LP-7 D3V3XA4B10LP | Diodes_UDFN-10_1.0x2.5mm_P0.5mm | U2 |
| 1 | TLV75801PDRVT TLV75801PDRV | WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U3 |
| 1 | ENS210-LQFM ENS210 | AMS_QFN-4-1EP_2x2mm_P0.95mm_EP0.7x1.6mm | U4 |
| 1 | SCD41-D-R2 | Sensirion_SCD4x-1EP_10.1x10.1mm_P1.25mm_EP4.8x4.8mm | U5 |
| 1 | SGP41-D-R3 SGP41-D-R4 | XDCR_SGP41-D-R4 | U6 |
| 2 | 61302211121 Conn_01x22_Pin | PinHeader_1x22_P2.54mm_Vertical | J1, J2 |
| 2 | ~ | SW_SPST_PTS810 | BOOT1, RESET1 |
| 1 | USB4105-GF-A USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | JUSB1 |
| 1 | 150060RS75000 WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
| 1 | 16347 LED | LED_0603_1608Metric | D2 |
| 3 | GMC10X7R106K10NT 10uF | C_0603_1608Metric | C1, C6, C7 |
| 4 | GMC10X7R104K25NT 0.1uF | C_0603_1608Metric | C2, C3, C4, C5 |
| 2 | GMC10X7R105K10NT 1uF | C_0603_1608Metric | C8, C9 |
| 3 | RM06F5101CT 5.1k | R_0603_1608Metric | R1, R2, R8 |
| 3 | RM06F1002CT 10k | R_0603_1608Metric | R3, R4, R5 |
| 1 | RM06F1004CT 1M | R_0603_1608Metric | R6 |
| 1 | RM06F2003CT 200k | R_0603_1608Metric | R7 |
| 1 | RM06F4R70CT 4.7 | R_0603_1608Metric | R9 |
Aqproto design files
The KiCad project lives in the HOUXA8/aqproto repository on GitHub; these links point at the commit this page was built from.
- Layoutaqproto.kicad_pcb
- Schematicaqproto.kicad_sch
- BOMBOM.csv
Aqproto: common questions
What microcontroller does the Aqproto use?
The Aqproto is built around the ESP32-S3-MINI-1-N8, from the ESP32 family.
How big is the Aqproto PCB?
The Aqproto measures 25.5 × 62.8 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Aqproto?
31 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Aqproto design files?
From the HOUXA8/aqproto repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Aqproto design in my own project?
The repository has no license, so all rights stay with HOUXA8. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Aqproto without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k