TunerVCO STM32

hsetlik·TunerVCO_STM32·Schematic/TunerVCO_STM32.kicad_pcb

TunerVCO STM32 PCB layout, top view — open source STM32 board by hsetlik

About the TunerVCO STM32 PCB

TunerVCO STM32 is an open source STM32 PCB design by hsetlik, published on GitHub. It is a 4-layer board measuring 45.7 × 110 mm, with 82 components from 48 distinct parts.

Its main chip is the STM32G030F6P6, from the STM32 family. Other key parts include the AS3340, TL074, TL072 and AMS1117. By type, the board carries 39 resistors, 18 capacitors, 10 connectors, 6 ICs, 1 transistor and 1 switch.

From the project

This repo contains the code, schematic, and PCB design for a full-featured voltage controlled oscillator with an OLED-based tuner in a 9HP Eurorack module. The VCO is built around the AS3340 IC from Alfa, while the tuner is powered by an STM32G030F6P6 microcontroller.

This repo contains the code, schematic, and PCB design for a full-featured voltage controlled oscillator with an OLED-based tuner in a 9HP Eurorack module. The VCO is built around the AS3340 IC from Alfa, while the tuner is powered by an STM32G030F6P6 microcontroller.

This is an improved version of my earlier tuner VCO module. The old one runs on an ESP32 WROOM cannibalized from an unused dev board I had lying around, with firmware written in the Arduino framework. The old ESP32 version works fine and sounds great, but I decided it was worthwhile to make an updated version based on a…

Main components on the TunerVCO STM32

TunerVCO STM32 bill of materials (BOM)

82 components, 48 distinct parts.

QtyPartRefs
1
AS3340
U101
1
TL074
U102
1
TL072
U103
1
STM32G030F6P6
U104
1
~
U105
1
AMS1117
U106
1
BC847
Q101
1
1V/OCT
J101
1
FM
J102
1
HARD SYNC
J103
1
SOFT SYNC
J104
1
PWM
J105
1
Pulse
J106
1
Saw
J107
1
Triangle
J108
1
POWER
J109
1
SWI
J110
1
20k Trim2
RV101
1
10k Trim1
RV102
1
10k Coarse
RV103
Show 28 more
QtyPartRefs
1
10k Fine
RV104
1
10k PWM Depth
RV105
1
10k Pulse Width
RV106
1
RST
SW101
1
WS2812B
D102
9
100n
C101, C105, C106, C111, C112, C113, C114, C117 +1
3
1n
C102, C103, C104
3
4u7
C107, C108, C115
2
220n
C109, C110
1
10u
C116
2
1M
R101, R102
1
1M5
R103
1
470
R104
1
1k8
R105
1
24k
R106
1
5k6
R107
1
680
R108
4
47k
R109, R113, R137, R139
10
100k
R110, R111, R124, R125, R126, R128, R129, R130 +2
2
220k
R112, R116
2
2k2
R114, R115
3
92k
R117, R118, R119
2
10k
R120, R121
2
680k
R122, R123
1
12k
R127
1
4k7
R133
2
R_PULLUP
R134, R136
2
1k
R135, R138

TunerVCO STM32 design files

The KiCad project lives in the hsetlik/TunerVCO_STM32 repository on GitHub; these links point at the commit this page was built from.

TunerVCO STM32: common questions

What microcontroller does the TunerVCO STM32 use?

The TunerVCO STM32 is built around the STM32G030F6P6, from the STM32 family.

How big is the TunerVCO STM32 PCB?

The TunerVCO STM32 measures 45.7 × 110 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the TunerVCO STM32?

82 components, from 48 distinct parts. The full bill of materials is listed on this page.

Where can I download the TunerVCO STM32 design files?

From the hsetlik/TunerVCO_STM32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the TunerVCO STM32 design in my own project?

The repository has no license, so all rights stay with hsetlik. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the TunerVCO STM32 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards