5 open source boards using the STM32G030F6P6

Real designs built with the STM32G030F6P6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the STM32G030F6P6

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the STM32G030F6P6 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 4.7 µF).
  • The PA1 pin has a series resistor on 3 of 5 designs, most often 10 kΩ (then 75 Ω).
  • The PA4 pin has a series resistor on 3 of 5 designs, most often 10 kΩ (then 1 kΩ).
  • The PA5 pin has a series resistor on 3 of 5 designs, most often 4.7 kΩ (then 75 Ω).
PB7/PB8pin 1Connected to: AP7381-33Y-13 40%, INA180A2IDBVR 40%, MCP4725A0T-E/CH 40% · not connected 20%
  • Series resistor on 40% · 4.7 kΩ (4), 10 kΩ (2)
  • Capacitor to GND on 40% · 100 nF (4), 4.7 µF (2)
  • Pull-up to 3.3V on 40% · 10 kΩ (1)
PC15pin 3Connected to: Not connected 60% · a signal 40%
  • Resistor to GND on 40% · 1 kΩ (2), 2.49 kΩ (2)
  • Capacitor to GND on 40% · 47 nF (2), 56 pF (2)
  • Series resistor on 40% · 33 kΩ (2)
VDDpin 4Connected to: 3.3V 60% · a signal 40%
  • Decoupling capacitor on 60% · 100 nF (2), 4.7 µF (2)
VSSpin 5Connected to: GND 60% · a signal 40%
NRSTpin 6Connected to: A connector 60%
  • Resistor to GND on 40% · 1 kΩ (2)
  • Capacitor to GND on 40% · 100 nF (2)
PA0pin 7Connected to: Not connected 60% · a signal 40%
  • Resistor to GND on 40% · 47 kΩ (2), 4.7 kΩ (2)
  • Series resistor on 40% · 100 Ω (2)
PA1pin 8Connected to: MCP4725A0T-E/CH 40%, a connector 40% · not connected 40%
  • Series resistor on 60% · 10 kΩ (2), 75 Ω (1)
PA2pin 9Connected to: Not connected 60% · a signal 40%
  • Series resistor on 40% · 4.7 kΩ (2)
PA3pin 10Connected to: Not connected 60% · a signal 40%
  • Series resistor on 40% · 100 kΩ (2)
PA4pin 11Connected to: A connector 40% · not connected 40%
  • Series resistor on 60% · 10 kΩ (2), 1 kΩ (1)
PA5pin 12Connected to: A connector 40% · not connected 40%
  • Series resistor on 60% · 4.7 kΩ (2), 75 Ω (1)
  • Resistor to GND on 40% · 10 kΩ (2)
PB0/PB1/PB2/PA8pin 15Connected to: Not connected 67% · a signal 33%
PA11/PA9pin 16Connected to: Not connected 100%
PA12/PA10pin 17Connected to: Not connected 100%
PB3/PB4/PB5/PB6pin 20Connected to: Not connected 67% · a signal 33%

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Nylok-Heater by 3nboyd, Nylok-Heater by boydportfolio, TunerVCO STM32 by hsetlik and Class2 by rmd6502.

The STM32G030F6P6 in open source designs

The gallery holds 5 open source boards using the STM32G030F6P6 from 5 GitHub repositories; a typical one measures about 38 × 100 mm and carries around 64 components.

80% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.

The most starred is TunerVCO STM32 by hsetlik.

Microcontrollers on boards using the STM32G030F6P6

What boards using the STM32G030F6P6 are built for

STM32G030F6P6: common questions

Where can I find a STM32G030F6P6 reference design?

Each of the 5 boards on this page is a real design using the STM32G030F6P6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32G030F6P6 VDD pin?

The VDD pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the STM32G030F6P6.

What resistor goes on the STM32G030F6P6 PA1 pin?

The PA1 pin has a series resistor on 3 of 5 designs, most often 10 kΩ (then 75 Ω). Counted from the KiCad layouts of 5 open source designs using the STM32G030F6P6.

What resistor goes on the STM32G030F6P6 PA4 pin?

The PA4 pin has a series resistor on 3 of 5 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 5 open source designs using the STM32G030F6P6.

What parts are used alongside the STM32G030F6P6?

The AP7381-33Y-13, INA180A2IDBVR, MCP4725A0T-E/CH and MP8771GQ-Z appear in the most repositories here.

Which microcontrollers do boards using the STM32G030F6P6 use?

Most are built on STM32 (5).

How big is a typical board using the STM32G030F6P6?

The median is 38 × 100 mm, and 80% are two-layer designs.

What is the most popular open source board using the STM32G030F6P6?

By GitHub stars, TunerVCO STM32 by hsetlik, with 0 stars.

Can I simulate one of these boards using the STM32G030F6P6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part