Wake up-
husnainxali·Wake-up-·PCB/alarm clock.kicad_pcb
About the Wake up- PCB
Wake up- is an open source ESP32 PCB design by husnainxali, published on GitHub under the MIT license. It is a 2-layer board measuring 75.2 × 90 mm, with 15 components from 5 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. By type, the board carries 6 switches, 6 diodes, 1 IC, 1 connector and 1 buzzer.
It belongs with the retro computing and iot & wireless designs in this gallery.
From the project
Wake_up An alarm clock based on the retro brick phone customized for your own prefrence and style.
This is a custom alarm clock that I made. While I was scrolling Pinterest I saw an old 90s brick phone and I got the idea to make an alarm clock for my room that looks like an brick phone although its not as polished as my imagination but as a beginner it has been a great project for me. I learned a lot from this project and i am looking forward to make it better.

Main components on the Wake up-
Wake up- bill of materials (BOM)
15 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | MCU_Seeed_ESP32C3 | U1 |
| 1 | Conn_01x08_Pin | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 6 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6 |
| 6 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6 |
Wake up- design files
The KiCad project lives in the husnainxali/Wake-up- repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/alarm clock.kicad_pcb
- SchematicPCB/alarm clock.kicad_sch
- BOMbom.csv
Wake up-: common questions
What microcontroller does the Wake up- use?
The Wake up- is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Wake up- PCB?
The Wake up- measures 75.2 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Wake up-?
15 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Wake up- design files?
From the husnainxali/Wake-up- repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Wake up- design in my own project?
Yes, under the terms of its MIT license, which husnainxali chose for the repository.
Can I test firmware for the Wake up- without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k