Midi keyboard
huzi-ctrl·midi-keyboard

About the Midi keyboard PCB
Midi keyboard is an open source ESP32 PCB design by huzi-ctrl, published on GitHub. It is a board, with 61 components from 13 distinct parts.
Its main chip is the ESP32-S3-Zero, from the ESP32 family. Other key parts include the PCF8574AP. By type, the board carries 25 diodes, 17 capacitors, 10 switches, 3 resistors, 2 ICs and 1 connector.
It belongs with the audio and keyboards designs in this gallery.
Main components on the Midi keyboard
Midi keyboard bill of materials (BOM)
61 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-Zero | Waveshare ESP32-S3-Zero | U1 |
| 1 | PCF8574AP | DIP-16_W7.62mm | U2 |
| 1 | Conn_01x07_Pin | keys | J1 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 2 | SLIDER | Potentiometer_Bourns_PTA1543_Single_Slide | RV1, RV2 |
| 1 | RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW4 |
| 9 | SW_Push | Kailh Choc Low-Profile Switches | SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13 +1 |
| 16 | SK6812MINI-E | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1, D2, D3, D4, D5, D15, D16, D17 +8 |
| 9 | D | D_DO-35_SOD27_P7.62mm_Horizontal | D6, D7, D8, D9, D10, D11, D12, D13 +1 |
| 1 | 47uf | CP_Radial_D8.0mm_P3.50mm | C1 |
| 16 | 100nf | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C3, C4, C5, C6, C7, C8, C9 +8 |
| 2 | 4.7K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 1 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
Midi keyboard design files
The KiCad project lives in the huzi-ctrl/midi-keyboard repository on GitHub; these links point at the commit this page was built from.
- SchematicMIDI starter.kicad_sch
- BOMBOM.csv
Midi keyboard: common questions
What microcontroller does the Midi keyboard use?
The Midi keyboard is built around the ESP32-S3-Zero, from the ESP32 family.
How many components are on the Midi keyboard?
61 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Midi keyboard design files?
From the huzi-ctrl/midi-keyboard repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the Midi keyboard design in my own project?
The repository has no license, so all rights stay with huzi-ctrl. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Midi keyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k