12 open source boards using the PCF8574AP
Real designs built with the PCF8574AP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
The claw expansion board
askiiart
99.8 × 99.8 mm46 parts2LNo license1RP2040/RP2350
OpenDeck-RP2040-v0
Bugatsec
86.1 × 121.7 mm32 parts2LMIT1- schematic only · 36 partsAVR/Arduino
Smart-Viscosity-Measurement and-Control-System-VYTRON
rashadrahimzade
36 partsCustom license1 ESP8266
Split
dipa-cotton
251 × 148.4 mm239 parts2LNo license0Nordic nRF
ChillBoard
shreeyuvan2020
150.3 × 93.9 mm184 parts2LNo license0ESP32
D03-MAIN-CTRL
byhabibi
160 × 115 mm59 parts2LNo license0ESP32
StarBoy
127001-crtl
104.9 × 100.6 mm35 parts2LMIT0- schematic only · 61 partsESP32
Midi keyboard
huzi-ctrl
61 partsNo license0 - schematic only · 57 partsRP2040/RP2350
Archive fuzz
ravinder-Olivier
57 partsNo license0 ESP8266
Split left
dipa-cotton
217.6 × 150 mm194 parts2LNo license0ESP32
WoMoHome ESP Touch LCD 7 HAT
Sharki-66
135 × 77 mm46 parts2LMIT0IOExpander
TTF-fog
23.8 × 23.4 mm5 parts2LNo license0
How designs wire the PCF8574AP
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the PCF8574AP connects to, and the resistors, capacitors and other passives placed on it.
- The INT_13 pin is left unconnected on 6 of 8 designs.
- The A0_1 pin is tied to GND on 5 of 8 designs (a signal on 2).
- The A1_2 pin is tied to GND on 5 of 8 designs (a signal on 2).
- The A2_3 pin is tied to GND on 5 of 8 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| A0_1pin 1 | Connected to: GND 63% · a signal 25% | — |
| A1_2pin 2 | Connected to: GND 63% · a signal 25% | — |
| A2_3pin 3 | Connected to: GND 63% · a signal 25% | — |
| GND_8pin 8 | Connected to: GND 88% | — |
| P6_11pin 11 | Connected to: Not connected 63% · a signal 38% | — |
| P7_12pin 12 | Connected to: Not connected 63% · a signal 38% | — |
| INT_13pin 13 | Connected to: Not connected 75% | — |
| VDD_16pin 16 | Connected to: 3.3V 88% | — |
8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include The claw expansion board by askiiart, OpenDeck-RP2040-v0 by Bugatsec, StarBoy by 127001-crtl and D03-MAIN-CTRL by byhabibi.
The PCF8574AP in open source designs
The gallery holds 12 open source boards using the PCF8574AP from 11 GitHub repositories; a typical one measures about 135 × 100.6 mm and carries around 52 components.
100% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is The claw expansion board by askiiart.
Parts used alongside the PCF8574AP
Microcontrollers on boards using the PCF8574AP
What boards using the PCF8574AP are built for
PCF8574AP: common questions
Where can I find a PCF8574AP reference design?
Each of the 12 boards on this page is a real design using the PCF8574AP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the PCF8574AP INT_13 pin connected?
The INT_13 pin is left unconnected on 6 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the PCF8574AP.
How is the PCF8574AP A0_1 pin connected?
The A0_1 pin is tied to GND on 5 of 8 designs (a signal on 2). Counted from the KiCad layouts of 8 open source designs using the PCF8574AP.
How is the PCF8574AP A1_2 pin connected?
The A1_2 pin is tied to GND on 5 of 8 designs (a signal on 2). Counted from the KiCad layouts of 8 open source designs using the PCF8574AP.
Which microcontrollers do boards using the PCF8574AP use?
Most are built on ESP32 (4), ESP8266 (2), RP2040/RP2350 (2) and AVR/Arduino (1).
How big is a typical board using the PCF8574AP?
The median is 135 × 100.6 mm, and 100% are two-layer designs.
What is the most popular open source board using the PCF8574AP?
By GitHub stars, The claw expansion board by askiiart, with 1 stars.
Can I simulate one of these boards using the PCF8574AP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.