HardLabs

Panelized veryTinyPi

HynixCJR·veryTinyPi·manufacturing/panelized/panelized_veryTinyPi.kicad_pcb

Panelized veryTinyPi PCB layout, top view — open source board by HynixCJR

About the Panelized veryTinyPi PCB

Panelized veryTinyPi is an open source PCB design by HynixCJR, published on GitHub under the GPL-3.0 license. It is a 6-layer board measuring 49.1 × 48.6 mm, with 35 components from 18 distinct parts.

Other key parts include the RP2354A, XC6206P332MR and ABM8-272-T3_C20625731. By type, the board carries 18 capacitors, 9 resistors, 3 ICs, 1 connector, 1 switch and 1 LED.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

A Raspberry Pi RP2354A devboard that can fit on the tip of your finger!

It's a very average sized board. Too big, even.

veryTinyPi is a Raspberry Pi RP2354A devboard that measures only 14.2mm x 14.4mm x 6.3mm. It is a stripped-down implementation of the official RP2350 reference hardware design, featuring: - An 8-pin header with six GPIO pins, featuring two I2C channels, one full UART channel, or one full SPI channel - A BOOTSEL button - 2MB flash - Dual Arm Cortex-M33 or dual Hazard3 RISC-V processors @ 150MHz - C/C++ SDK, MicroPython support - A full USB-C port for programming - Power ON LED (white)

Panelized veryTinyPi, from the project README
From the project README

Main components on the Panelized veryTinyPi

RP2354AXC6206P332MRABM8-272-T3_C20625731

Panelized veryTinyPi bill of materials (BOM)

35 components, 18 distinct parts.

QtyPartRefs
1
RP2354A
Raspberry Pi
U1
1
XC6206P332MR
Torex Semicon
U2
1
ABM8-272-T3_C20625731
Abracon LLC
U3
1
ZH-8A
CAX
CN1
1
NANOT160AS
C&K
SW1
1
GT-USB-7047A
G-Switch
USB2
1
GL0402UW01
Gui guang light
LED2
1
3.3uH
SOREDE
L1
4
4.7uF
Samsung Electro-Mechanics
C1, C2, C3, C6
2
1uF
Samsung Electro-Mechanics
C4, C5
10
100nF
Samsung Electro-Mechanics
C7, C9, C10, C11, C12, C13, C14, C15 +2
2
15pF
FH (Guangdong Fenghua Advanced Tech)
C19, C20
1
33
UNI-ROYAL(Uniroyal Elec)
R1
2
5.1k
UNI-ROYAL(Uniroyal Elec)
R2, R3
2
1k
UNI-ROYAL(Uniroyal Elec)
R4, R9
2
27
GiantOhm
R5, R6
1
470
UNI-ROYAL(Uniroyal Elec)
R7
1
10k
UNI-ROYAL(Uniroyal Elec)
R8

Panelized veryTinyPi design files

The KiCad project lives in the HynixCJR/veryTinyPi repository on GitHub; these links point at the commit this page was built from.

Panelized veryTinyPi: common questions

How big is the Panelized veryTinyPi PCB?

The Panelized veryTinyPi measures 49.1 × 48.6 mm, has 6 copper layers and is 1.6 mm thick.

How many components are on the Panelized veryTinyPi?

35 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Panelized veryTinyPi design files?

From the HynixCJR/veryTinyPi repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Panelized veryTinyPi design in my own project?

Yes, under the terms of its GPL-3.0 license, which HynixCJR chose for the repository.

More boards in veryTinyPi

Similar boards