14 open source boards using the ABM8-272-T3_C20625731
Real designs built with the ABM8-272-T3_C20625731, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Multiprobe
picolemon
50 × 50 mm89 parts4LMIT13RP2040/RP2350
AmogusRP2040
alx-alexpark
68.8 × 88.4 mm42 parts2LNo license3RP2040/RP2350
Usb charging hub
tobycm
80 × 95 mm206 parts4LNo license2RP2040/RP2350
Usb charging hub
hackclub
80 × 95 mm206 parts4LNo license2RP2040/RP2350
Raspberry pi power hub
tobycm
39 × 27 mm65 parts2LMIT2RP2040/RP2350
Billig
playlogo
86 × 74 mm58 parts2LTAPR-OHL-1.02RP2040/RP2350
Devboardrp2350
espcaa
59.2 × 26.4 mm43 parts4LNo license2ESP32
MeshDeck
ThePangel
90.8 × 121.7 mm234 parts4LNo license1VeryTinyPi
HynixCJR
14.4 × 14.2 mm35 parts6LGPL-3.00RP2040/RP2350
Scriptstick
axellse
46.1 × 18.7 mm35 parts2LNo license0RP2040/RP2350
Devbackup
espcaa
33.6 × 25.4 mm41 parts2LNo license2RP2040/RP2350
Pumper
wolf-yuan-6115
33.8 × 93.1 mm90 parts4LGPL-3.01Panelized veryTinyPi
HynixCJR
49.1 × 48.6 mm35 parts6LGPL-3.00RP2040/RP2350
Lightwolf
wolf-yuan-6115
21 × 51 mm46 parts4LGPL-3.01
How designs wire the ABM8-272-T3_C20625731
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the ABM8-272-T3_C20625731 connects to, and the resistors, capacitors and other passives placed on it.
- The 1 pin has a capacitor to GND on 10 of 11 designs, most often 15 pF (then 18 pF).
- The 3 pin has a series resistor on 10 of 11 designs, most often 1 kΩ.
- The 3 pin has a capacitor to GND on 9 of 11 designs, most often 15 pF (then 18 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1pin 1 | Connected to: The microcontroller 73% |
|
| GNDpin 2, 4 | Connected to: GND 91% | — |
| 3pin 3 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Multiprobe by picolemon, AmogusRP2040 by alx-alexpark, Devbackup by espcaa and Usb charging hub by hackclub.
The ABM8-272-T3_C20625731 in open source designs
The gallery holds 14 open source boards using the ABM8-272-T3_C20625731 from 11 GitHub repositories; a typical one measures about 49.6 × 50.5 mm and carries around 52 components.
64% use four copper layers or more, and 50% carry an open source license.
The most starred is Multiprobe by picolemon.
Parts used alongside the ABM8-272-T3_C20625731
Microcontrollers on boards using the ABM8-272-T3_C20625731
What boards using the ABM8-272-T3_C20625731 are built for
ABM8-272-T3_C20625731: common questions
Where can I find a ABM8-272-T3_C20625731 reference design?
Each of the 14 boards on this page is a real design using the ABM8-272-T3_C20625731. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ABM8-272-T3_C20625731 1 pin connected?
The 1 pin has a capacitor to GND on 10 of 11 designs, most often 15 pF (then 18 pF). Counted from the KiCad layouts of 11 open source designs using the ABM8-272-T3_C20625731.
What resistor goes on the ABM8-272-T3_C20625731 3 pin?
The 3 pin has a series resistor on 10 of 11 designs, most often 1 kΩ. Counted from the KiCad layouts of 11 open source designs using the ABM8-272-T3_C20625731.
What parts are used alongside the ABM8-272-T3_C20625731?
The RP2040, AP63203WU-7, CYPD3175-24LQXQ, GT-USB-7010ASV and LS0505EVD22 appear in the most repositories here.
Which microcontrollers do boards using the ABM8-272-T3_C20625731 use?
Most are built on RP2040/RP2350 (11) and ESP32 (1).
How big is a typical board using the ABM8-272-T3_C20625731?
The median is 49.6 × 50.5 mm, and 36% are two-layer designs.
What is the most popular open source board using the ABM8-272-T3_C20625731?
By GitHub stars, Multiprobe by picolemon, with 13 stars.
Can I simulate one of these boards using the ABM8-272-T3_C20625731 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.