Thermostat
i3detroit·MQTT-Thermostat·rev.1/board/thermostat.kicad_pcb
About the Thermostat PCB
Thermostat is an open source PCB design by i3detroit, published on GitHub. It is a 2-layer board measuring 99.7 × 78.1 mm, with 36 components from 14 distinct parts.
Other key parts include the 74HC04, WeMos_mini, MCP23017 and 74LS08. By type, the board carries 12 LEDs, 11 resistors, 4 ICs, 3 connectors and 1 capacitor.
It belongs with the iot & wireless designs in this gallery.
Main components on the Thermostat
Thermostat bill of materials (BOM)
36 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC04 | DIP-14_W7.62mm_cuttable-trace | U1 |
| 1 | WeMos_mini | D1_mini_board | U2 |
| 1 | MCP23017 | DIP-28_W7.62mm | U3 |
| 1 | 74LS08 | DIP-14_W7.62mm_cuttable-trace | U4 |
| 1 | BME280, or daughterboard connector | Pin_Header_Straight_1x05 | J1 |
| 1 | 5v connector to power from 24vac off control wires | Pin_Header_Straight_1x02 | J2 |
| 1 | CONN_01X05 | Pin_Header_Straight_1x05 | P2 |
| 5 | SW_Push | SW_PUSH_6mm | FAN_AUTO2, FAN_ON2, RESET1, TEMP_DOWN1, TEMP_UP1 |
| 8 | LED | LED_D3.0mm | COOL1, FAN_AUTO1, FAN_ON1, HEAT1, LED_ACTUAL_COOL1, LED_ACTUAL_FAN1, LED_ACTUAL_HEAT1, OFF1 |
| 3 | SW_Push | SW_Tactile_SPST_Angled | COOL2, HEAT2, OFF2 |
| 1 | CONN_01X07 | OLED_I2C_SPI | OLED1 |
| 1 | 4.7µF | C_0603_HandSoldering | C1 |
| 9 | 120R | R_0603_HandSoldering | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
| 2 | 5.7k | R_0603_HandSoldering | R10, R11 |
Thermostat design files
The KiCad project lives in the i3detroit/MQTT-Thermostat repository on GitHub; these links point at the commit this page was built from.
Thermostat: common questions
How big is the Thermostat PCB?
The Thermostat measures 99.7 × 78.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Thermostat?
36 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Thermostat design files?
From the i3detroit/MQTT-Thermostat repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Thermostat design in my own project?
The repository has no license, so all rights stay with i3detroit. Use it as a reference, and ask the author before reusing the design.
More boards in MQTT-Thermostat
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kL0 USB
Luos-io
20.3 × 15.3 mm19 parts2LMIT547Breakout board
Luos-io
26.7 × 27.9 mm29 parts2LMIT547Stm32f0 disco Luos shield
Luos-io
55.9 × 99.1 mm26 parts2LMIT547L0 USBA
Luos-io
20.3 × 15.3 mm19 parts2LMIT547