20 open source boards using the WeMos_mini

Real designs built with the WeMos_mini, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

20 boardsClear filters|Most starred

How designs wire the WeMos_mini

Read from the KiCad layouts of 19 open source designs, one per repository: what each pin of the WeMos_mini connects to, and the resistors, capacitors and other passives placed on it.

  • The RST pin is left unconnected on 16 of 19 designs (a signal on 2).
  • The 5V pin is tied to 5V on 14 of 19 designs (not connected on 2, a signal on 3).
  • The 3.3V pin is tied to 3.3V on 14 of 19 designs (not connected on 3, a signal on 2).
  • The TX pin is left unconnected on 13 of 19 designs (a signal on 5).
5Vpin 1Connected to: 5V 74% · a signal 16%
GNDpin 2Connected to: GND 89%
RXpin 7Connected to: Not connected 63% · a signal 37%
TXpin 8Connected to: Not connected 68% · a signal 26%
RSTpin 9Connected to: Not connected 84%
3.3Vpin 16Connected to: 3.3V 74% · not connected 16%

10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP8266ControllerCircuit by stuartpittaway, HASwitchPlate by aderusha, RetroWiFiModem by mecparts and Row driver by CarlRaymond.

The WeMos_mini in open source designs

The gallery holds 20 open source boards using the WeMos_mini from 19 GitHub repositories; a typical one measures about 75 × 54.1 mm and carries around 20 components.

95% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.

The most starred is ESP8266ControllerCircuit by stuartpittaway.

Microcontrollers on boards using the WeMos_mini

WeMos_mini: common questions

Where can I find a WeMos_mini reference design?

Each of the 20 boards on this page is a real design using the WeMos_mini. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the WeMos_mini RST pin connected?

The RST pin is left unconnected on 16 of 19 designs (a signal on 2). Counted from the KiCad layouts of 19 open source designs using the WeMos_mini.

How is the WeMos_mini 5V pin connected?

The 5V pin is tied to 5V on 14 of 19 designs (not connected on 2, a signal on 3). Counted from the KiCad layouts of 19 open source designs using the WeMos_mini.

How is the WeMos_mini 3.3V pin connected?

The 3.3V pin is tied to 3.3V on 14 of 19 designs (not connected on 3, a signal on 2). Counted from the KiCad layouts of 19 open source designs using the WeMos_mini.

What parts are used alongside the WeMos_mini?

The C32565, C7605, 74HCT245D, AP1117-33 and DFPlayer_Mini appear in the most repositories here.

Which microcontrollers do boards using the WeMos_mini use?

Most are built on ESP8266 (9) and AVR/Arduino (2).

How big is a typical board using the WeMos_mini?

The median is 75 × 54.1 mm, and 95% are two-layer designs.

What is the most popular open source board using the WeMos_mini?

By GitHub stars, ESP8266ControllerCircuit by stuartpittaway, with 1,143 stars.

Can I simulate one of these boards using the WeMos_mini before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part