Esp23 i3 heat thermostat
i3detroit·MQTT-Thermostat·rev.2-heat/esp23 i3 heat thermostat/esp23 i3 heat thermostat.kicad_pcb
About the Esp23 i3 heat thermostat PCB
Esp23 i3 heat thermostat is an open source ESP32 PCB design by i3detroit, published on GitHub. It is a 2-layer board measuring 111 × 65 mm, with 54 components from 23 distinct parts.
Its main chip is the ESP32-WROOM-32U, from the ESP32 family. Other key parts include the MAX7219, MOC3063M, LD1117S33TR_SOT223 and YAAJ_DCDC_StepDown_LM2596. By type, the board carries 15 resistors, 9 capacitors, 8 LEDs, 7 diodes, 6 ICs and 4 switches.
It belongs with the iot & wireless designs in this gallery.
Main components on the Esp23 i3 heat thermostat
Esp23 i3 heat thermostat bill of materials (BOM)
54 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX7219 | SOP-24_7.5x15.4mm_P1.27mm | U1 |
| 2 | MOC3063M | DIP-6_W7.62mm | U2, U3 |
| 1 | ESP32-WROOM-32U | ESP32-WROOM-32U | U4 |
| 1 | LD1117S33TR_SOT223 | SOT-223-3_TabPin2 | U5 |
| 1 | YAAJ_DCDC_StepDown_LM2596 | YAAJ_DCDC_StepDown_LM2596 | U6 |
| 2 | BT134-600 | TO-126-3_Horizontal_TabDown | Q1, Q2 |
| 1 | Conn_01x06 | PhoenixContact_MC_1,5_6-G-3.5_1x06_P3.50mm_Horizontal | J1 |
| 1 | bme280 | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Horizontal | J4 |
| 4 | SW_MEC_5E | SW_TH_Tactile_Omron_B3F-10xx | SW2, SW3, SW4, SW5 |
| 8 | LTS-6980HR | 7SegmentLED_LTS6760_LTS6780 | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 |
| 4 | 1N4004 | D_SMA | D3, D4, D5, D6 |
| 3 | LED | LED_0603_1608Metric | D8, D9, D10 |
| 3 | 0.1uF | C_0603_1608Metric | C1, C3, C7 |
| 1 | 1000uF | CP_Radial_D7.5mm_P2.50mm | C5 |
| 1 | 22uF | CP_Radial_D5.0mm_P2.00mm | C6 |
| 4 | 1nF | C_0603_1608Metric | C8, C9, C10, C11 |
| 1 | 12K | R_0603_1608Metric | R1 |
| 2 | 560 | R_0603_1608Metric | R4, R5 |
| 2 | 100 | R_0603_1608Metric | R6, R7 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 4.7k | R_0603_1608Metric | R8, R14, R15, R16, R17, R18 |
| 1 | 10K | R_0603_1608Metric | R9 |
| 3 | 2.2k | R_0603_1608Metric | R19, R20, R21 |
Esp23 i3 heat thermostat design files
The KiCad project lives in the i3detroit/MQTT-Thermostat repository on GitHub; these links point at the commit this page was built from.
Esp23 i3 heat thermostat: common questions
What microcontroller does the Esp23 i3 heat thermostat use?
The Esp23 i3 heat thermostat is built around the ESP32-WROOM-32U, from the ESP32 family.
How big is the Esp23 i3 heat thermostat PCB?
The Esp23 i3 heat thermostat measures 111 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp23 i3 heat thermostat?
54 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp23 i3 heat thermostat design files?
From the i3detroit/MQTT-Thermostat repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esp23 i3 heat thermostat design in my own project?
The repository has no license, so all rights stay with i3detroit. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp23 i3 heat thermostat without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in MQTT-Thermostat
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k