14 open source boards using the C51118
Real designs built with the C51118, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Rp gameboy cartridge hw
shilga
52.8 × 61.2 mm68 parts4LCERN-OHL-P-2.072RP2040/RP2350
Grooveboard choc rp
ianklug
120 × 25 mm37 parts2LCC-BY-SA-4.058RP2040/RP2350
Bemini rp
ianklug
220 × 70 mm60 parts2LCC-BY-SA-4.055ESP32
Flight-Data-Computer
Ethan-Poag
86 × 165 mm125 parts2LGPL-3.03Evtivity ev tester
EVtivity
100 × 64 mm51 parts2LCERN-OHL-P-2.03Serial bread
testudor
26 × 32 mm18 parts2LCC-BY-SA-4.03STM32
Pdk prog
brainsmoke
42 × 37 mm56 parts2LCC-BY-4.01ESP32
DSH-PROSE
DSHSTUDIOS
181.4 × 111.2 mm52 parts2LNo license1STM32
Keyboard
brainsmoke
357 × 125 mm310 parts2LNo license0RP2040/RP2350
Ps1-memory card usb
fabPlane
36.2 × 63.1 mm40 parts4LGPL-3.00AS5600-Breakout
StoyNickel
25.4 × 17.8 mm17 parts2LMIT0RP2040/RP2350
Grooveboard mx rp
ianklug
120 × 25 mm37 parts2LCC-BY-SA-4.058RP2040/RP2350
PicoROM - ROM Emulator
wickerwaka
42.2 × 17.8 mm53 parts6LMIT332RP2040/RP2350
Grooveboard rp
ianklug
120 × 25 mm37 parts2LCC-BY-SA-4.058
How designs wire the C51118
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the C51118 connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 12 of 12 designs, most often 10 µF (then 1 µF).
- The VOUT pin has a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 1 µF).
- The EN pin is tied to 5V on 9 of 12 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 5V 75% · a signal 25% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| ENpin 3 | Connected to: 5V 75% · a signal 25% | — |
| NCpin 4 | Connected to: Not connected 100% | — |
| VOUTpin 5 | Connected to: 3.3V 92% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PicoROM - ROM Emulator by wickerwaka, Rp gameboy cartridge hw by shilga, Grooveboard choc rp by ianklug and Bemini rp by ianklug.
The C51118 in open source designs
The gallery holds 14 open source boards using the C51118 from 12 GitHub repositories; a typical one measures about 93 × 49.1 mm and carries around 52 components.
79% are two-layer designs, the rest use four layers or more, and 86% carry an open source license.
The most starred is PicoROM - ROM Emulator by wickerwaka.
Microcontrollers on boards using the C51118
What boards using the C51118 are built for
C51118: common questions
Where can I find a C51118 reference design?
Each of the 14 boards on this page is a real design using the C51118. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the C51118 VIN pin?
The VIN pin has a decoupling capacitor on 12 of 12 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 12 open source designs using the C51118.
What decoupling capacitors do designs use on the C51118 VOUT pin?
The VOUT pin has a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 12 open source designs using the C51118.
How is the C51118 EN pin connected?
The EN pin is tied to 5V on 9 of 12 designs (a signal on 3). Counted from the KiCad layouts of 12 open source designs using the C51118.
What parts are used alongside the C51118?
The C2040, C15999, C190862, C424093 and C81720 appear in the most repositories here.
Which microcontrollers do boards using the C51118 use?
Most are built on RP2040/RP2350 (7), ESP32 (2) and STM32 (2).
How big is a typical board using the C51118?
The median is 93 × 49.1 mm, and 79% are two-layer designs.
What is the most popular open source board using the C51118?
By GitHub stars, PicoROM - ROM Emulator by wickerwaka, with 332 stars.
Can I simulate one of these boards using the C51118 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.