6 open source boards using the C190862
Real designs built with the C190862, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Grooveboard choc rp
ianklug
120 × 25 mm37 parts2LCC-BY-SA-4.058RP2040/RP2350
Bemini rp
ianklug
220 × 70 mm60 parts2LCC-BY-SA-4.055RP2040/RP2350
Rp2040 8key
kata0510
110 × 38.3 mm52 parts2LMIT4RP2040/RP2350
Electronics Control Unit (ECU)
synthesissolutions
120 × 100 mm344 parts8LNo license2RP2040/RP2350
Grooveboard mx rp
ianklug
120 × 25 mm37 parts2LCC-BY-SA-4.058RP2040/RP2350
Grooveboard rp
ianklug
120 × 25 mm37 parts2LCC-BY-SA-4.058
The C190862 in open source designs
The gallery holds 6 open source boards using the C190862 from 4 GitHub repositories; a typical one measures about 120 × 31.6 mm and carries around 45 components.
83% are two-layer designs, the rest use four layers or more, and 83% carry an open source license.
The most starred is Grooveboard mx rp by ianklug.
Microcontrollers on boards using the C190862
What boards using the C190862 are built for
C190862: common questions
Where can I find a C190862 reference design?
Each of the 6 boards on this page is a real design using the C190862. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the C190862 use?
Most are built on RP2040/RP2350 (6).
How big is a typical board using the C190862?
The median is 120 × 31.6 mm, and 83% are two-layer designs.
What is the most popular open source board using the C190862?
By GitHub stars, Grooveboard mx rp by ianklug, with 58 stars.
Can I simulate one of these boards using the C190862 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.