DRUMKIT-InUr-POCKET
IbrahimYounes890·DRUMKIT-InUr-POCKET·PCB/DoReMi-Board.kicad_sch
About the DRUMKIT-InUr-POCKET PCB
DRUMKIT-InUr-POCKET is an open source ESP32 PCB design by IbrahimYounes890, published on GitHub under the MIT license. It is a board, with 10 components from 5 distinct parts.
Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 5 switches, 3 diodes, 1 IC and 1 connector.
It belongs with the keyboards and displays & leds designs in this gallery.
From the project
This is a music making PCB for quick improv music!
This is a Music machine PCB for week three of Half-Life HackClub! It contains various inputs for music making, focusing mainly on a Drum Kit with extra inputs such as buttons and rotary encoders. I am using the Waveshare-ESP32-S3-Zero as the brains, connected to the inputs and my custom capacitive touch Drum Kit.
I used the beginner MIDI Project as a starting point, and put the components recommended in my board too. What I wanted to change up was the Piano, so I made it a drum Kit instead!
Main components on the DRUMKIT-InUr-POCKET
DRUMKIT-InUr-POCKET bill of materials (BOM)
10 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Waveshare ESP32-S3-ZERO | Waveshare ESP32-S3-Zero | U2 |
| 1 | Conn_01x07 | Copper Keyboard | J1 |
| 3 | SW_Push | Kailh Choc Low-Profile Switches | SW1, SW2, SW3 |
| 2 | RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW4, SW5 |
| 3 | SK6812MINI-E | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1, D2, D3 |
DRUMKIT-InUr-POCKET design files
The KiCad project lives in the IbrahimYounes890/DRUMKIT-InUr-POCKET repository on GitHub; these links point at the commit this page was built from.
- SchematicPCB/DoReMi-Board.kicad_sch
DRUMKIT-InUr-POCKET: common questions
What microcontroller does the DRUMKIT-InUr-POCKET use?
The DRUMKIT-InUr-POCKET is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.
How many components are on the DRUMKIT-InUr-POCKET?
10 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the DRUMKIT-InUr-POCKET design files?
From the IbrahimYounes890/DRUMKIT-InUr-POCKET repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the DRUMKIT-InUr-POCKET design in my own project?
Yes, under the terms of its MIT license, which IbrahimYounes890 chose for the repository.
Can I test firmware for the DRUMKIT-InUr-POCKET without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k