BOTTOM board 95 x 60 mm
icesys·smart_attendance_system·hardware/schematics/kicad/sas_pcb/pcb_bottom/pcb_bottom.kicad_pcb
About the BOTTOM board 95 x 60 mm
BOTTOM board 95 x 60 mm is an open source PCB design by icesys, published on GitHub. It is a 2-layer board measuring 95 × 60 mm, with 9 components from 9 distinct parts.
By type, the board carries 6 connectors, 2 capacitors and 1 switch.
It belongs with the power & battery designs in this gallery.
From the project
Open the .kicadpro` of the board you want (KiCad 10):
Open the .kicadpro` of the board you want (KiCad 10):
Gerber and drill files: ../../../gerbers/.
Before re-plotting the Gerbers after any change: press B (Edit > Fill All Zones), run Inspect > Design Rules Checker, then File > Fabrication Outputs.
BOTTOM board 95 x 60 mm bill of materials (BOM)
9 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | J_MB (to MIDDLE) | IDC-Header_2x08_P2.54mm_Vertical | J201 |
| 1 | Battery 18650 (under the board) | PinHeader_1x02_P2.54mm_Vertical | J202 |
| 1 | TP4056 (OUT+ B+ B- OUT-) | MOD_TP4056 | J203 |
| 1 | MT3608 (VIN+ VIN- VOUT+ VOUT-) | MOD_MT3608 | J204 |
| 1 | microSD module (GND VCC MISO MOSI SCK CS) | MOD_SD_6PIN | J205 |
| 1 | DS3231 (32K SQW SCL SDA VCC GND) | MOD_DS3231_6PIN | J206 |
| 1 | Slide switch 6-pin | SW_Slide_6pin_2mm | SW201 |
| 1 | 470u 10V (10 mm, 5 mm pins) | CP_Radial_D10.0mm_P5.00mm | C201 |
| 1 | 100N 100n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C202 |
BOTTOM board 95 x 60 mm design files
The KiCad project lives in the icesys/smart_attendance_system repository on GitHub; these links point at the commit this page was built from.
BOTTOM board 95 x 60 mm: common questions
How big is the BOTTOM board 95 x 60 mm?
The BOTTOM board 95 x 60 mm measures 95 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BOTTOM board 95 x 60 mm?
9 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BOTTOM board 95 x 60 mm design files?
From the icesys/smart_attendance_system repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BOTTOM board 95 x 60 mm design in my own project?
The repository has no license, so all rights stay with icesys. Use it as a reference, and ask the author before reusing the design.
More boards in smart_attendance_system
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k