TOP board 95 x 60 mm
icesys·smart_attendance_system·hardware/schematics/kicad/sas_pcb/pcb_top/pcb_top.kicad_pcb
About the TOP board 95 x 60 mm
TOP board 95 x 60 mm is an open source PCB design by icesys, published on GitHub. It is a 2-layer board measuring 95 × 60 mm, with 19 components from 16 distinct parts.
By type, the board carries 5 resistors, 4 diodes, 3 connectors, 3 capacitors, 2 switches and 1 transistor.
It belongs with the power & battery designs in this gallery.
From the project
Open the .kicadpro` of the board you want (KiCad 10):
Open the .kicadpro` of the board you want (KiCad 10):
Gerber and drill files: ../../../gerbers/.
Before re-plotting the Gerbers after any change: press B (Edit > Fill All Zones), run Inspect > Design Rules Checker, then File > Fabrication Outputs.
TOP board 95 x 60 mm bill of materials (BOM)
19 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2N2222A | TO-92_Inline | Q1 |
| 1 | J_TM (to MIDDLE) | IDC-Header_2x08_P2.54mm_Vertical | J1 |
| 1 | OLED 0.96in (GND VCC SCL SDA) | MOD_OLED096 | J2 |
| 1 | RFID coil 35 x 46 | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Buzzer 12 mm (8 mm pins) | Buzzer_12mm_P8mm | BZ1 |
| 1 | Button 1 (session) | SW_PUSH_6mm | SW1 |
| 1 | Button 2 (info) | SW_PUSH_6mm | SW2 |
| 1 | blue (power LED) | LED_D5.0mm | D1 |
| 1 | green | LED_D5.0mm | D2 |
| 1 | red | LED_D5.0mm | D3 |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D4 |
| 2 | 100N 100n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C3 |
| 1 | 10U 10u | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 3 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 100K 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
TOP board 95 x 60 mm design files
The KiCad project lives in the icesys/smart_attendance_system repository on GitHub; these links point at the commit this page was built from.
TOP board 95 x 60 mm: common questions
How big is the TOP board 95 x 60 mm?
The TOP board 95 x 60 mm measures 95 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TOP board 95 x 60 mm?
19 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TOP board 95 x 60 mm design files?
From the icesys/smart_attendance_system repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TOP board 95 x 60 mm design in my own project?
The repository has no license, so all rights stay with icesys. Use it as a reference, and ask the author before reusing the design.
More boards in smart_attendance_system
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k