MIDDLE board 95 x 60 mm
icesys·smart_attendance_system·hardware/schematics/kicad/sas_pcb/pcb_middle/pcb_middle.kicad_pcb
About the MIDDLE board 95 x 60 mm
MIDDLE board 95 x 60 mm is an open source ESP32 PCB design by icesys, published on GitHub. It is a 2-layer board measuring 95 × 60 mm, with 9 components from 8 distinct parts.
Its main chip is the ESP32-S3 row 1 (USB end at the top), from the ESP32 family. By type, the board carries 5 connectors, 3 capacitors and 1 diode.
It belongs with the power & battery designs in this gallery.
From the project
Open the .kicadpro` of the board you want (KiCad 10):
Open the .kicadpro` of the board you want (KiCad 10):
Gerber and drill files: ../../../gerbers/.
Before re-plotting the Gerbers after any change: press B (Edit > Fill All Zones), run Inspect > Design Rules Checker, then File > Fabrication Outputs.
MIDDLE board 95 x 60 mm bill of materials (BOM)
9 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3 row 1 (USB end at the top) | PinSocket_1x22_P2.54mm_Vertical | J101 |
| 1 | ESP32-S3 row 2 | PinSocket_1x22_P2.54mm_Vertical | J102 |
| 1 | RDM6300 (TX RX nc GND 5V | ANT1 ANT2) | MOD_RDM6300 | J103 |
| 1 | J_TM (to TOP) | IDC-Header_2x08_P2.54mm_Vertical | J105 |
| 1 | J_MB (to BOTTOM) | IDC-Header_2x08_P2.54mm_Vertical | J106 |
| 1 | Schottky 1A (1N5819) | D_DO-41_SOD81_P10.16mm_Horizontal | D101 |
| 1 | 10U 10u | C_Disc_D5.0mm_W2.5mm_P5.00mm | C101 |
| 2 | 100N 100n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C102, C103 |
MIDDLE board 95 x 60 mm design files
The KiCad project lives in the icesys/smart_attendance_system repository on GitHub; these links point at the commit this page was built from.
MIDDLE board 95 x 60 mm: common questions
What microcontroller does the MIDDLE board 95 x 60 mm use?
The MIDDLE board 95 x 60 mm is built around the ESP32-S3 row 1 (USB end at the top), from the ESP32 family.
How big is the MIDDLE board 95 x 60 mm?
The MIDDLE board 95 x 60 mm measures 95 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MIDDLE board 95 x 60 mm?
9 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MIDDLE board 95 x 60 mm design files?
From the icesys/smart_attendance_system repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MIDDLE board 95 x 60 mm design in my own project?
The repository has no license, so all rights stay with icesys. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MIDDLE board 95 x 60 mm without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in smart_attendance_system
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k