Jensx1000
About the Jensx1000 PCB
Jensx1000 is an open source PCB design by icnagy, published on GitHub under the CERN-OHL-S-2.0 license. It is a board, with 74 components from 49 distinct parts.
Other key parts include the 4013, 74LS221, LF353, LM301 and LM741. By type, the board carries 35 resistors, 12 capacitors, 6 ICs, 4 transistors, 2 connectors and 2 switches.
It belongs with the audio designs in this gallery.
From the project
Jen SX 1000 Clone
Jen SX-1000 Clone By Csaba Nagy, 2026 SPDX-License-Identifier: CERN-OHL-S-2.0
STATUS: UNVERIFIED These schematics and PCB layouts have been recreated from original hardware but have NOT yet been built or tested. Discrepancies found between available schematics and PCBs noted in schematic. Component values might be incorrect. Use at your own risk. Corrections and build reports welcome.
Main components on the Jensx1000
Jensx1000 bill of materials (BOM)
74 components, 49 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4013 | DIP-14_W7.62mm_LongPads | U10 |
| 1 | 74LS221 | DIP-16_W10.16mm_LongPads | U14 |
| 1 | LF353 | DIP-8_W7.62mm_LongPads | U16 |
| 2 | LM301 | DIP-8_W7.62mm | U21, U22 |
| 1 | LM741 | DIP-8_W7.62mm_LongPads | U26 |
| 1 | PN2222A | TO-92_Inline_Wide | Q5 |
| 2 | BC309 | TO-92_Inline_Wide_CBE | Q6, Q7 |
| 1 | BC239 | TO-92_Inline_Wide_CBE | Q8 |
| 1 | Conn_01x09_Pin | PinHeader_1x09_P2.54mm_Vertical | J4 |
| 1 | Conn_01x11_Pin | PinHeader_1x10_P2.54mm_Vertical | J7 |
| 1 | 22uF | CP_Radial_D8.0mm_P3.80mm | CP27 |
| 3 | 10K | Potentiometer_Piher_PT-10-V10_Vertical | RT20, RT21, RT27 |
| 1 | 4K7 | Potentiometer_Piher_PT-10-V10_Vertical | RT26 |
| 1 | 100K | Potentiometer_Piher_PT-10-V10_Vertical | RT28 |
| 2 | 10KA | Potentiometer_Omeg_PC16BU_Vertical | RV19, RV30 |
| 2 | 100KA | Potentiometer_Omeg_PC16BU_Vertical | RV22, RV29 |
| 1 | 100KB | Potentiometer_Omeg_PC16BU_Vertical | RV24 |
| 1 | SW_Rotary_1x3_MP | SR2511F-0403-(L)K0A-C9-S-3_1 | SW2 |
| 1 | 2P4T | SR2511F-0204-(L)K0A-C9-S-3 | SW40 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D9, D10 |
Show 29 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10uF | CP_Radial_D8.0mm_P3.80mm | C4, C5 |
| 2 | 22pF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C24, C25 |
| 1 | 0.01uF | C_Rect_L11.0mm_W2.8mm_P10.00mm_MKT | C26 |
| 1 | 100pF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C30 |
| 1 | 220pF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C31 |
| 1 | 330pF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C32 |
| 1 | 0.047pF | C_Rect_L11.0mm_W2.8mm_P10.00mm_MKT | C33 |
| 1 | 0.001uF | C_Rect_L11.0mm_W2.8mm_P10.00mm_MKT | C35 |
| 1 | 0.1uF | C_Rect_L11.0mm_W2.8mm_P10.00mm_MKT | C36 |
| 1 | 33pF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C37 |
| 1 | 560R | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R65 |
| 5 | 22K | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R66, R79, R97, R98, R99 |
| 4 | 47K | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R67, R68, R78, R80 |
| 3 | 100K | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R69, R81, R91 |
| 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R70 |
| 1 | 4K7 | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R71 |
| 1 | 5K6 | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R72 |
| 1 | 4K7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R76 |
| 1 | 15K | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R77 |
| 2 | 1K2 | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R82, R92 |
| 1 | 1M | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R83 |
| 1 | 680R | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R88 |
| 1 | 1K5 | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R89 |
| 2 | 10K | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R90, R101 |
| 1 | 220R | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R93 |
| 1 | 3K3 | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R94 |
| 6 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R95, R96, R100, R102, R103, R104 |
| 1 | 100K | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R105 |
| 1 | 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R110 |
Jensx1000 design files
The KiCad project lives in the icnagy/jensx1000 repository on GitHub; these links point at the commit this page was built from.
- Schematicvco.kicad_sch
Jensx1000: common questions
How many components are on the Jensx1000?
74 components, from 49 distinct parts. The full bill of materials is listed on this page.
Where can I download the Jensx1000 design files?
From the icnagy/jensx1000 repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Jensx1000 design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which icnagy chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687