31 open source boards using the 4013
Real designs built with the 4013, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
80ColumnCard
btb
155.2 × 78.6 mm47 parts2LApache-2.042MICRO-OX Main VCO board
JordanAceto
133.9 × 165.1 mm280 parts4LCC-BY-4.08Euclid Main Board
m0xpd
78 × 108 mm128 parts2LCC-BY-SA-4.07Cosmac toy v2
kanpapa
72 × 95 mm56 parts2LNo license4Kicad LFO 1 2
promesoft
100 × 100 mm147 parts2LMIT2AVR/Arduino
Automata Generator Standard
Sirawit7205
246.4 × 127 mm121 parts2LNo license21802-Mini-Pixie-Video
dmadole
100 × 100 mm49 parts2LGPL-3.021802-Mini-Compact-Flash
dmadole
100 × 100 mm36 parts2LNo license21802-Mini-Front-Panel
dmadole
100 × 86.4 mm49 parts2LNo license11802-Mini-1854-Serial
dmadole
100 × 100 mm44 parts2LNo license1- schematic only · 74 parts
Jensx1000
icnagy
74 partsCERN-OHL-S-2.01 - schematic only · 54 parts
Cx22
owen-rp2a03
54 partsNo license1 SoundLab16StepSequencer
JakeBoothy
314.9 × 110 mm348 parts4LNo license0Sequencer
gehel
163 × 116.5 mm154 parts4LNo license01802-Mini-Expander-RTC
dmadole
100 × 100 mm65 parts2LNo license0AC30
linuxha
173 × 97.5 mm65 parts2LNo license0MapEletro
Heymity
250 × 200 mm52 parts2LNo license0RC1802 UI
tebl
99.1 × 80 mm47 parts2LGPL-3.032STM32
Modulation board
JordanAceto
111.8 × 165.1 mm231 parts4LCC-BY-4.08Kicad LFO 1 3
promesoft
100 × 100 mm147 parts2LMIT2AVR/Arduino
Automata Generator Minimal
Sirawit7205
128.3 × 71.8 mm103 parts2LNo license2Josh Ox Ribbon Synth VCF/VCA/BBD board
JordanAceto
132.1 × 213.4 mm349 parts2LCC-BY-4.01Flip flops
ajjackson
29.8 × 106.7 mm49 parts2LNo license1HF-Grundplatte
yannickbock
252 × 172.5 mm120 parts2LNo license0MICRO-OX VCF/VCA board
JordanAceto
60.3 × 165.1 mm132 parts2LCC-BY-4.08Kicad LFO 1
promesoft
100 × 100 mm137 parts2LMIT2AVR/Arduino
VIA I/O Card
rjhelms
99.1 × 78.7 mm69 parts2LNo license2VCOSeparate
wakimizufu
100 × 100 mm81 parts2LNo license1STM32
Sub Oscillator
JordanAceto
39.4 × 78.7 mm84 parts2LCC-BY-4.02Divn
niektb
20 × 100 mm60 parts2LCC-BY-SA-4.034ServoTester
eyalo-dev
113 × 67.9 mm27 parts2LNo license0
How designs wire the 4013
Read from the KiCad layouts of 24 open source designs, one per repository: what each pin of the 4013 connects to, and the resistors, capacitors and other passives placed on it.
- The S pins is tied to GND on 60% of them (not connected on 4, -12V on 4, a signal on 11).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Spin 6, 8 | Connected to: GND 60% · a signal 23% | — |
| VSSpin 7 | Connected to: GND 92% | — |
| VDDpin 14 | Connected to: 5V 96% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 80ColumnCard by btb, Divn by niektb, RC1802 UI by tebl and MICRO-OX Main VCO board by JordanAceto.
The 4013 in open source designs
The gallery holds 31 open source boards using the 4013 from 26 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 74 components.
86% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.
The most starred is 80ColumnCard by btb.
Microcontrollers on boards using the 4013
What boards using the 4013 are built for
4013: common questions
Where can I find a 4013 reference design?
Each of the 31 boards on this page is a real design using the 4013. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 4013 S pin connected?
The S pins is tied to GND on 60% of them (not connected on 4, -12V on 4, a signal on 11). Counted from the KiCad layouts of 24 open source designs using the 4013.
What parts are used alongside the 4013?
The 4001, 4011, 40106, TL072 and 4023 appear in the most repositories here.
Which microcontrollers do boards using the 4013 use?
Most are built on AVR/Arduino (3) and STM32 (2).
How big is a typical board using the 4013?
The median is 100 × 100 mm, and 86% are two-layer designs.
What is the most popular open source board using the 4013?
By GitHub stars, 80ColumnCard by btb, with 42 stars.
Can I simulate one of these boards using the 4013 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.