Caryatid

ideocentric·caryatid·hardware/pcb/caryatid.kicad_pcb

Caryatid PCB layout, top view — open source board by ideocentric

About the Caryatid PCB

Caryatid is an open source PCB design by ideocentric, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 150 × 90 mm, with 128 components from 60 distinct parts.

Other key parts include the BQ24074RGT, TPS61023DRL, 74HC14, MCP6002 and 1x20 socket. By type, the board carries 64 resistors, 30 capacitors, 18 connectors, 6 jumpers, 4 ICs and 2 modules.

It belongs with the power & battery and test & measurement designs in this gallery.

From the project

Common power and I/O board for Daisy Seed instruments. One PCB layout, populated per build.

KiCad 9 project. All four sheets are captured. 125 components, 101 nets, ERC clean at 0 violations.

The dangling-global count reached zero. It ran 33 → 4 → 0 as seed, panel-io and audio landed, and each drop was predicted before the sheet was drawn. Five no-connects remain and all five are deliberate: ITERM on the charger, J11 pin 9 (the spare), and the three unused 74HC14 outputs.

Main components on the Caryatid

Caryatid bill of materials (BOM)

128 components, 60 distinct parts.

QtyPartRefs
1
BQ24074RGT
U1
1
TPS61023DRL
U2
1
74HC14
U3
1
MCP6002
U4
1
1x20 socket
A1
1
1x20 socket
A2
1
DC in
J1
1
Latch switch
J3
1
Charge LEDs
J4
1
Analogue bus
J5
1
SW1 switch
J6
1
SW2 switch
J7
1
SW3 switch
J8
1
Soft pot
J9
1
FSR
J10
1
Digital bus
J11
1
RGB status
J12
1
Comms A - Qwiic
J13
1
Mic bias return
J14
1
Comms B - module
J15
Show 40 more
QtyPartRefs
1
Expansion / SPI1
J16
1
Audio out L/R/G
J17
1
Audio in L/R/rtn
J18
1
Comms A - module
J19
1
18650 protected
BT1
1
Mic bias select L
JP1
1
Mic path select L
JP2
1
Mic gain select L
JP3
1
Mic bias select R
JP4
1
Mic path select R
JP5
1
Mic gain select R
JP6
1
SS34
D1
1
FB >=1A
FB1
1
1uH 4.2A
L1
1
10u/25V
C1
10
10u
C2, C3, C4, C5, C22, C24, C25, C26 +2
1
22u
C6
1
100u
C7
2
10n
C8, C9
10
100n
C10, C11, C12, C13, C14, C15, C16, C17 +2
2
220n
C19, C20
3
1u
C21, C23, C27
8
10k
R1, R34, R35, R36, R37, R38, R39, R46
1
1k2
R2
1
887R 1%
R3
1
46k4
R4
3
0R
R5, R63, R65
9
100k
R6, R11, R12, R55, R56, R57, R59, R60 +1
1
348k 1%
R7
1
47k5 1%
R8
16
1k
R9, R10, R13, R18, R19, R20, R21, R22 +8
4
10k 0.1%
R14, R15, R16, R17
7
100R
R27, R28, R29, R30, R31, R32, R33
1
510
R40
2
300
R41, R42
2
4k7
R43, R44
1
3k
R45
2
2k2
R51, R53
2
220R
R52, R54
2
392R
R67, R68

Caryatid design files

The KiCad project lives in the ideocentric/caryatid repository on GitHub; these links point at the commit this page was built from.

Caryatid: common questions

How big is the Caryatid PCB?

The Caryatid measures 150 × 90 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Caryatid?

128 components, from 60 distinct parts. The full bill of materials is listed on this page.

Where can I download the Caryatid design files?

From the ideocentric/caryatid repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Caryatid design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which ideocentric chose for the repository.

Similar boards