PCB-SHIELD
ifsul-camaqua-robotica·PCB-SHIELD·robocup-esp32-1/robocup-esp32-1.kicad_pcb
About the PCB-SHIELD
PCB-SHIELD is an open source ESP32 PCB design by ifsul-camaqua-robotica, published on GitHub. It is a 2-layer board measuring 97.5 × 66 mm, with 38 components from 10 distinct parts.
Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. By type, the board carries 2 switches and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Repositório para guardar o arquivo da PCB de um SHIELD para o carro da ROBOCUP 2025
- Arquivo "robocup-esp-32-1" -> Guarda os arquivos do KICAD para a PCB
- Arquivo "KICAD-LIBRARIES" -> Guarda as bibliotecas (footprints e symbols) utilizados para fazer a PCB (Não foi possível adicionar o arquivo da biblioteca utilizada "Espressif", porém no qual pode ser encontrada facilmente em repositório no github)
- Medindo do centro dos círculos até o centro deles. - Cada um deles tem 3,5 mm das bordas (esta medida foi feita da borda dos círculos), e 3mm de diâmetro. - Esquerda até Direita -> 84,5 mm - Baixo até Cima -> 53mm
Main components on the PCB-SHIELD
PCB-SHIELD bill of materials (BOM)
38 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DEVKIT-V1 | MODULE_ESP32_DEVKIT_V1 | U1 |
| 1 | VCCA, GNDA | PinSocket_1x02_P2.54mm_Vertical | AA1 |
| 1 | VCCB, GNB | PinSocket_1x02_P2.54mm_Vertical | AB1 |
| 1 | INT, ADD, XCL, XDA, SDA, SCL, GND, VCC | PinSocket_1x08_P2.54mm_Vertical | AC1 |
| 10 | VCC, GND | PinSocket_1x02_P2.54mm_Vertical | AL1, AL2, AL3, AL4, AL5, AL6, AL7, AL8 +2 |
| 10 | SDA, SCL | PinSocket_1x02_P2.54mm_Vertical | COR1, I2C1, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7 +2 |
| 2 | SA, SB, VCC, GND | PinSocket_1x04_P2.54mm_Vertical | E1, E2 |
| 1 | ENA, IN1, IN2, IN3, IN4, ENB | PinSocket_1x06_P2.54mm_Vertical | H1 |
| 9 | XSHUT | PinSocket_1x01_P2.54mm_Vertical | INF1, INF2, INF3, INF4, INF5, INF6, INF7, INF8 +1 |
| 2 | SIGNAL, VCC, GND | PinSocket_1x03_P2.54mm_Vertical | S1, S2 |
PCB-SHIELD design files
The KiCad project lives in the ifsul-camaqua-robotica/PCB-SHIELD repository on GitHub; these links point at the commit this page was built from.
PCB-SHIELD: common questions
What microcontroller does the PCB-SHIELD use?
The PCB-SHIELD is built around the ESP32-DEVKIT-V1, from the ESP32 family.
How big is the PCB-SHIELD?
The PCB-SHIELD measures 97.5 × 66 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCB-SHIELD?
38 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCB-SHIELD design files?
From the ifsul-camaqua-robotica/PCB-SHIELD repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PCB-SHIELD design in my own project?
The repository has no license, so all rights stay with ifsul-camaqua-robotica. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PCB-SHIELD without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k