Gaming toaster
ikajdan·gaming-toaster
About the Gaming toaster PCB
Gaming toaster is an open source Microchip SAM PCB design by ikajdan, published on GitHub. It is a 2-layer board measuring 112 × 88 mm, with 42 components from 24 distinct parts.
Its main chip is the ATSAML21G16B-AUT, from the Microchip SAM family. Other key parts include the MOC3041M and HC-05. By type, the board carries 10 connectors, 10 capacitors, 8 resistors, 4 ICs, 3 transistors and 2 fuses.
From the project
Gamin toaster design
Main components on the Gaming toaster
Gaming toaster bill of materials (BOM)
42 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATSAML21G16B-AUT | TQFP-48_7x7mm_P0.5mm | U1 |
| 2 | MOC3041M | DIP-6_W7.62mm | U2, U3 |
| 1 | HC-05 | HC-05 | U4 |
| 2 | BT139-600 | TO-220-3_Vertical | Q1, Q2 |
| 1 | BS107 | TO-92_Inline | Q3 |
| 1 | Thermocouple | Molex_Micro-Fit_3.0_43650-0215_1x02_P3.00mm_Vertical | J1 |
| 3 | Mains | TerminalBlock_bornier-2_P5.08mm | J2, J5, J8 |
| 1 | LED Strip | Molex_Micro-Fit_3.0_43650-0315_1x03_P3.00mm_Vertical | J3 |
| 1 | Top Heater | TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | SWD | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Bottom Heater | TerminalBlock_bornier-2_P5.08mm | J7 |
| 1 | Display | Molex_SlimStack_502426-1410_2x07_P0.40mm_Vertical | J9 |
| 1 | Electromagnet | TerminalBlock_bornier-2_P5.08mm | J10 |
| 2 | 7A | Fuseholder_Clip-5x20mm_Littelfuse_520_Inline_P20.50x5.80mm_D1.30mm_Horizontal | F1, F2 |
| 1 | IRM-10-3.3 | Converter_ACDC_MeanWell_IRM-10-xx_THT | PS1 |
| 1 | IRM-20-5 | Converter_ACDC_MeanWell_IRM-20-xx_THT | PS2 |
| 1 | IRM-02-12 | Converter_ACDC_MeanWell_IRM-02-xx_THT | PS3 |
| 1 | Power | SolderWire-0.75sqmm_1x04_P4.8mm_D1.25mm_OD2.3mm | SW1 |
| 1 | 1N4002 | D_SMA | D1 |
| 2 | 2u2/6v3 | CP_Elec_4x3 | C1, C9 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | 100n | C_0603_1608Metric | C2, C3, C4, C6, C7, C8, C10 |
| 1 | 100u/16v | CP_Elec_6.3x3.9 | C5 |
| 2 | 10k | R_0603_1608Metric | R1, R8 |
| 6 | 220R | R_0603_1608Metric | R2, R3, R4, R5, R6, R7 |
Gaming toaster design files
The KiCad project lives in the ikajdan/gaming-toaster repository on GitHub; these links point at the commit this page was built from.
- Layoutgaming_toaster.kicad_pcb
- Schematicgaming_toaster.kicad_sch
Gaming toaster: common questions
What microcontroller does the Gaming toaster use?
The Gaming toaster is built around the ATSAML21G16B-AUT, from the Microchip SAM family.
How big is the Gaming toaster PCB?
The Gaming toaster measures 112 × 88 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Gaming toaster?
42 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Gaming toaster design files?
From the ikajdan/gaming-toaster repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Gaming toaster design in my own project?
The repository has no license, so all rights stay with ikajdan. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Gaming toaster without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416