HardLabs

Raspberry Pi Full Stack HAT

Ikarthikmb·Circuit-Designs·2_Raspberrypi_fs_hat_v01/2-Raspberry Pi FS Hat v01.kicad_pcb

Raspberry Pi Full Stack HAT layout, top view — open source Raspberry Pi board by Ikarthikmb
Simulate this board

About the Raspberry Pi Full Stack HAT

Raspberry Pi Full Stack HAT is an open source Raspberry Pi PCB design by Ikarthikmb, published on GitHub. It is a 2-layer board measuring 24 × 27.9 mm, with 9 components from 7 distinct parts.

Its main chip is the Raspberry_Pi_2_3, from the Raspberry Pi family. Other key parts include the DHT22. By type, the board carries 4 resistors, 2 diodes, 1 IC, 1 connector and 1 switch.

It belongs with the dev boards & breakouts and power & battery designs in this gallery.

From the project

Schematics and PCB designs implemented in Kicad.

- Converts the input ac/dc voltage(which does not exceed 35V) to output of 5 volts. This can be used to power circuits that require 5V as input supply for example Arduino(Requires 5V input power supply). - Connections: Connect a input power supply to the jack and the output is obtained fron pin heads. - To view/modify the source file, download the repository and navigate to 1-Breadboard Power Supply folder and open the bread power supply schematic.pro project file in KiCAD.

Raspberry Pi Full Stack HAT, from the project README
From the project README

Main components on the Raspberry Pi Full Stack HAT

DHT22

Raspberry Pi Full Stack HAT bill of materials (BOM)

9 components, 7 distinct parts.

QtyPartRefs
1
DHT22
U1
1
Raspberry_Pi_2_3
J1
1
SW_DPST
SW1
2
LED
D1, D2
1
10k
R1
1
330k
R2
2
R
R3, R4

Raspberry Pi Full Stack HAT design files

The KiCad project lives in the Ikarthikmb/Circuit-Designs repository on GitHub; these links point at the commit this page was built from.

Raspberry Pi Full Stack HAT: common questions

What microcontroller does the Raspberry Pi Full Stack HAT use?

The Raspberry Pi Full Stack HAT is built around the Raspberry_Pi_2_3, from the Raspberry Pi family.

How big is the Raspberry Pi Full Stack HAT?

The Raspberry Pi Full Stack HAT measures 24 × 27.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Raspberry Pi Full Stack HAT?

9 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Raspberry Pi Full Stack HAT design files?

From the Ikarthikmb/Circuit-Designs repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Raspberry Pi Full Stack HAT design in my own project?

The repository has no license, so all rights stay with Ikarthikmb. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Raspberry Pi Full Stack HAT without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in Circuit-Designs

Similar boards