8 open source boards using the SIC431AED-T1-GE3
Real designs built with the SIC431AED-T1-GE3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Moducard cm5-module
Dominik-Workshop
100 × 100 mm246 parts4LMIT5Ict baseboard
antmicro
150 × 50 mm203 parts4LApache-2.04Power Distribution Board Ver.2
IllinoisRoboticsInSpace
127 × 127 mm89 parts4LNo license2Job pcie switch expansion
antmicro
100 × 60 mm297 parts6LApache-2.00NavPoTS-South
RuberDuck9
58.9 × 58.9 mm106 parts4LAGPL-3.00SIC431
IllinoisRoboticsInSpace
127 × 127 mm89 parts2LNo license2Jetson Orin Baseboard
AtlasAutoware
120 × 90 mm312 parts8LNo license0PCBPCBNEW
IllinoisRoboticsInSpace
56.3 × 85.6 mm74 parts4LNo license2
How designs wire the SIC431AED-T1-GE3
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the SIC431AED-T1-GE3 connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 150 µF).
- The SW pins have a inductor on 6 of 6 designs, most often 1.2 µH (then 330 nH).
- The VDRV pin has a decoupling capacitor on 6 of 6 designs, most often 4.7 µF.
- The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 1 µF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1, 2, 22, 26 | Connected to: VCC 67% · a signal 33% |
|
| PGNDpin 3, 4, 13, 27 | Connected to: GND 100% | — |
| SWpin 5, 6, 7, 8, 9 | Connected to: Signal 52% · 5V 48% |
|
| GLpin 10, 11, 28 | Connected to: Not connected 100% | — |
| VDRVpin 12 | Connected to: 5V 50% · a signal 50% |
|
| VDDpin 15 | Connected to: 5V 50% · a signal 50% |
|
| AGNDpin 16, 25 | Connected to: GND 100% | — |
| VOUTpin 18 | Connected to: 3.3V 50% · a signal 50% |
|
| ENpin 19 | Connected to: 5V 67% · a signal 33% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Moducard cm5-module by Dominik-Workshop, Ict baseboard by antmicro, PCBPCBNEW by IllinoisRoboticsInSpace and Job pcie switch expansion by antmicro.
The SIC431AED-T1-GE3 in open source designs
The gallery holds 8 open source boards using the SIC431AED-T1-GE3 from 6 GitHub repositories; a typical one measures about 110 × 87.8 mm and carries around 155 components.
88% use four copper layers or more, and 50% carry an open source license.
The most starred is Moducard cm5-module by Dominik-Workshop.
Parts used alongside the SIC431AED-T1-GE3
Microcontrollers on boards using the SIC431AED-T1-GE3
What boards using the SIC431AED-T1-GE3 are built for
SIC431AED-T1-GE3: common questions
Where can I find a SIC431AED-T1-GE3 reference design?
Each of the 8 boards on this page is a real design using the SIC431AED-T1-GE3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SIC431AED-T1-GE3 VIN pin?
The VIN pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 150 µF). Counted from the KiCad layouts of 6 open source designs using the SIC431AED-T1-GE3.
How is the SIC431AED-T1-GE3 SW pin connected?
The SW pins have a inductor on 6 of 6 designs, most often 1.2 µH (then 330 nH). Counted from the KiCad layouts of 6 open source designs using the SIC431AED-T1-GE3.
What decoupling capacitors do designs use on the SIC431AED-T1-GE3 VDRV pin?
The VDRV pin has a decoupling capacitor on 6 of 6 designs, most often 4.7 µF. Counted from the KiCad layouts of 6 open source designs using the SIC431AED-T1-GE3.
Which microcontrollers do boards using the SIC431AED-T1-GE3 use?
Most are built on STM32 (1).
How big is a typical board using the SIC431AED-T1-GE3?
The median is 110 × 87.8 mm, and 13% are two-layer designs.
What is the most popular open source board using the SIC431AED-T1-GE3?
By GitHub stars, Moducard cm5-module by Dominik-Workshop, with 5 stars.
Can I simulate one of these boards using the SIC431AED-T1-GE3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.