HardLabs

DAQ-GPS Breakout-V1.0

IlyaasAitSimmou·krakenbane_one_pcb·DAQ-GPS_Breakout-V1.0/DAQ-GPS_Breakout-V1.0.kicad_pcb

DAQ-GPS Breakout-V1.0 layout, top view — open source board by IlyaasAitSimmou

About the DAQ-GPS Breakout-V1.0

DAQ-GPS Breakout-V1.0 is an open source PCB design by IlyaasAitSimmou, published on GitHub. It is a 4-layer board measuring 42 × 70 mm, with 7 components from 5 distinct parts.

Other key parts include the SAM-M10Q-00B. By type, the board carries 5 capacitors, 1 IC and 1 connector.

It belongs with the rf & radio, sensors and dev boards & breakouts designs in this gallery.

From the project

This GitHub Repository contains all kiCad files related to the SRAD data aqcuisition flight computer, KRAKENBANE I which was flown at Launch Canada on the Goldeneye rocket by the Turner Fenton Rocketry Association (TFRA) high school rocketry team.

A data acquisition (DAQ) flight computer for a model rocket, designed for the Launch Canada competition. The system is two KiCad projects: a main flight computer board and a GNSS breakout that mounts separately and connects over a cable.

This is my first PCB design using SMT components, developed with support from university rocketry team members.

The two boards are joined by a 6-pin JST GH (1.25 mm) cable carrying 3.3 V, GND, UART TX/RX, TIMEPULSE, and NRESET.

Main components on the DAQ-GPS Breakout-V1.0

SAM-M10Q-00B

DAQ-GPS Breakout-V1.0 bill of materials (BOM)

7 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SAM-M10Q-00B
U3
1
GNSS Connector - GNSS
J6
2
C (1 µF)
C(SAM-M10Q)1, C(SAM-M10Q)3
2
C (100 nF)
C(SAM-M10Q)2, C(SAM-M10Q)4
1
C (10 µF)
C(SAM-M10Q)5

DAQ-GPS Breakout-V1.0 design files

The KiCad project lives in the IlyaasAitSimmou/krakenbane_one_pcb repository on GitHub; these links point at the commit this page was built from.

DAQ-GPS Breakout-V1.0: common questions

How big is the DAQ-GPS Breakout-V1.0?

The DAQ-GPS Breakout-V1.0 measures 42 × 70 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the DAQ-GPS Breakout-V1.0?

7 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DAQ-GPS Breakout-V1.0 design files?

From the IlyaasAitSimmou/krakenbane_one_pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the DAQ-GPS Breakout-V1.0 design in my own project?

The repository has no license, so all rights stay with IlyaasAitSimmou. Use it as a reference, and ask the author before reusing the design.

More boards in krakenbane_one_pcb

Similar boards