USB Hub
IndexAsm·USB_Hub
About the USB Hub PCB
USB Hub is an open source PCB design by IndexAsm, published on GitHub. It is a 4-layer board measuring 50 × 50 mm, with 63 components from 15 distinct parts.
Other key parts include the USB2514B_BI, MIC2026-1XM, USBLC6-2SC6 and AMS1117-3.3. By type, the board carries 33 capacitors, 15 resistors, 9 ICs, 5 connectors and 1 crystal.
It belongs with the usb & debug tools designs in this gallery.
From the project
It has a USB-C input and 4 USB-A output ports. Every port has ESD protection.
It has a USB-C input and 4 USB-A output ports. Every port has ESD protection.
Everything is placed on a 4-layer board.

Main components on the USB Hub
USB Hub bill of materials (BOM)
63 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USB2514B_BI USB2514B_Bi | QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm | U1 |
| 2 | MIC2026-1XM MIC2026-1xM | SOIC-8_3.9x4.9mm_P1.27mm | U2, U3 |
| 5 | USBLC6-2SC6 | SOT-23-6 | U4, U5, U6, U7, U8 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U9 |
| 1 | CRYSTAL_GND24 Crystal_GND24 | Crystal_SMD_EuroQuartz_MT-4Pin_3.2x2.5mm | Y1 |
| 4 | USB_A | USB-A-S-X-X-VT | J1, J2, J3, J4 |
| 1 | USB4105-GF-A-120 | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J12 |
| 20 | 100N 100n | C_0603_1608Metric | C1, C3, C4, C6, C7, C8, C9, C10 +12 |
| 9 | 2U2 2u2 | C_0603_1608Metric | C2, C5, C14, C15, C16, C19, C20, C21 +1 |
| 2 | 8p | C_0603_1608Metric | C34, C35 |
| 2 | 22U 22u | C_1206_3216Metric | C57, C58 |
| 11 | 100K 100k | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 +3 |
| 1 | 12K 12k | R_0603_1608Metric | R12 |
| 2 | 5K1 5k1 | R_0603_1608Metric | R33, R34 |
| 1 | 1M | R_0603_1608Metric | R36 |
USB Hub design files
The KiCad project lives in the IndexAsm/USB_Hub repository on GitHub; these links point at the commit this page was built from.
- LayoutUSB_Hub.kicad_pcb
- SchematicUSB_Hub.kicad_sch
- BOMBOM.csv
USB Hub: common questions
How big is the USB Hub PCB?
The USB Hub measures 50 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the USB Hub?
63 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the USB Hub design files?
From the IndexAsm/USB_Hub repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the USB Hub design in my own project?
The repository has no license, so all rights stay with IndexAsm. Use it as a reference, and ask the author before reusing the design.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389