4 open source boards using the MIC2026-1xM
Real designs built with the MIC2026-1xM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Dock-HW
ZSWatch
80 × 48 mm58 parts4LGPL-3.038LPV01 SHIELD
pureHK
140 × 125 mm105 parts4LNo license0USB Hub
IndexAsm
50 × 50 mm63 parts4LNo license0- schematic only · 369 partsRaspberry Pi
PiCubed
NeilKhera
369 parts2LNo license0
The MIC2026-1xM in open source designs
The gallery holds 4 open source boards using the MIC2026-1xM from 4 GitHub repositories; a typical one measures about 80 × 50 mm and carries around 84 components.
75% use four copper layers or more, and 25% carry an open source license.
The most starred is Dock-HW by ZSWatch.
Parts used alongside the MIC2026-1xM
Microcontrollers on boards using the MIC2026-1xM
What boards using the MIC2026-1xM are built for
MIC2026-1xM: common questions
Where can I find a MIC2026-1xM reference design?
Each of the 4 boards on this page is a real design using the MIC2026-1xM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC2026-1xM use?
Most are built on Raspberry Pi (1).
How big is a typical board using the MIC2026-1xM?
The median is 80 × 50 mm, and 25% are two-layer designs.
What is the most popular open source board using the MIC2026-1xM?
By GitHub stars, Dock-HW by ZSWatch, with 38 stars.
Can I simulate one of these boards using the MIC2026-1xM before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.