23 open source boards using the USB2514B_Bi
Real designs built with the USB2514B_Bi, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Archer mainboard
EI2030
227 × 50 mm392 parts4LCERN-OHL-S-2.040STM32
Isoblue
oats-center
115 × 78 mm114 parts4LMIT25RP2040/RP2350
Pedalboard hw
pedalboard
174 × 111 mm142 parts2LCERN-OHL-P-2.014RP2040/RP2350
Pcb tentacle
octoprobe
100 × 165 mm130 parts2LMIT5ESP32
Esp32c3 devboard
tmilkovic51
47 × 34 mm69 parts4LCERN-OHL-P-2.03STM32
Mes main board
jmh8231-Dev
160 × 145 mm727 parts6LNo license2RP2040/RP2350
Midi controller
Tommie1236
100 × 100 mm515 parts4LCERN-OHL-W-2.02Balthazar-PSU-IO-v.2
balthazar-space
126.8 × 25.3 mm139 parts2LCERN-OHL-S-2.02RP2040/RP2350
LabNode-Nexus
aleko-khomasuridze
100 × 100 mm252 parts4LNo license1Replicookie
cmcquinn
184.2 × 127 mm173 parts6LCERN-OHL-S-2.01STM32
VCU CM4
NTURacingTeam
100 × 90 mm445 parts4LNo license0RP2040/RP2350
Nref motherboard
cetola
122.6 × 75.9 mm269 parts6LNo license0STM32
KigEyes
jrymk
100 × 60 mm256 parts4LCERN-OHL-S-2.00RP2040/RP2350
X1-palmrest to keyboard
wozniak-works
263.9 × 429.3 mm177 parts2LNo license0USB-HUB
omarmustafa130
250.4 × 116 mm86 parts2LNo license0Microchip SAM
USB-Meter
XFactHD
80.1 × 72.9 mm80 parts4LGPL-3.00USB Hub
IndexAsm
50 × 50 mm63 parts4LNo license0STM32
Atx
aep
170 × 170 mm53 parts4LNo license0Erbium
Enderman8843
48 × 57 mm22 parts2LNo license0RP2040/RP2350
Pcb octoprobe
octoprobe
100 × 165 mm128 parts2LMIT5STM32
VCU CM5
NTURacingTeam
100 × 90 mm418 parts4LNo license0Raspberry Pi
CM4RadarBoard
inventor02
83.8 × 65.2 mm242 parts6LNo license0Usb switch
reivax-boucoi
50 × 50 mm67 parts4LNo license1
How designs wire the USB2514B_Bi
Read from the KiCad layouts of 21 open source designs, one per repository: what each pin of the USB2514B_Bi connects to, and the resistors, capacitors and other passives placed on it.
- The RBIAS pin has a resistor to GND on 20 of 21 designs, most often 12 kΩ.
- The VDDA33 pins have a decoupling capacitor on 19 of 21 designs, most often 100 nF (then 10 µF).
- The VDD33 pins have a decoupling capacitor on 18 of 21 designs, most often 100 nF (then 10 µF).
- The XTALIN/CLKIN pin has a capacitor to GND on 18 of 21 designs, most often 18 pF (then 15 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDA33pin 5, 10, 29, 36 | Connected to: 3.3V 90% |
|
| CRFILTpin 14 | Connected to: Signal 86% |
|
| VDD33pin 15, 23 | Connected to: 3.3V 90% |
|
| PRTPWR4/BC_EN4pin 20 | Connected to: Not connected 62% · a signal 29% | — |
| SDA/SMBDATA/NON_REM1pin 22 | Connected to: Signal 76% · not connected 24% |
|
| SCL/SMBCLK/CFG_SEL0pin 24 | Connected to: Signal 81% |
|
| HS_IND/CFG_SEL1pin 25 | Connected to: Signal 90% |
|
| RESET_Npin 26 | Connected to: Signal 86% |
|
| VBUS_DETpin 27 | Connected to: 3.3V 52% · a signal 48% |
|
| SUSP_IND/LOCAL_PWR/NON_Rpin 28 | Connected to: Signal 86% |
|
| XTALOUTpin 32 | Connected to: Signal 90% |
|
| XTALIN/CLKINpin 33 | Connected to: Signal 95% |
|
| PLLFILTpin 34 | Connected to: Signal 86% |
|
| RBIASpin 35 | Connected to: Signal 100% |
|
| VSSpin 37 | Connected to: GND 95% | — |
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Archer mainboard by EI2030, Isoblue by oats-center, Pedalboard hw by pedalboard and Pcb octoprobe by octoprobe.
The USB2514B_Bi in open source designs
The gallery holds 23 open source boards using the USB2514B_Bi from 21 GitHub repositories; a typical one measures about 100 × 90 mm and carries around 142 components.
70% use four copper layers or more, and 48% carry an open source license.
The most starred is Archer mainboard by EI2030.
Parts used alongside the USB2514B_Bi
Microcontrollers on boards using the USB2514B_Bi
What boards using the USB2514B_Bi are built for
USB2514B_Bi: common questions
Where can I find a USB2514B_Bi reference design?
Each of the 23 boards on this page is a real design using the USB2514B_Bi. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the USB2514B_Bi RBIAS pin?
The RBIAS pin has a resistor to GND on 20 of 21 designs, most often 12 kΩ. Counted from the KiCad layouts of 21 open source designs using the USB2514B_Bi.
What decoupling capacitors do designs use on the USB2514B_Bi VDDA33 pin?
The VDDA33 pins have a decoupling capacitor on 19 of 21 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 21 open source designs using the USB2514B_Bi.
What decoupling capacitors do designs use on the USB2514B_Bi VDD33 pin?
The VDD33 pins have a decoupling capacitor on 18 of 21 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 21 open source designs using the USB2514B_Bi.
What parts are used alongside the USB2514B_Bi?
The AMS1117-3.3, RP2040, USBLC6-2SC6, W25Q128JVS and FSUSB42MUX appear in the most repositories here.
Which microcontrollers do boards using the USB2514B_Bi use?
Most are built on RP2040/RP2350 (7), STM32 (6), ESP32 (1) and NXP (1).
How big is a typical board using the USB2514B_Bi?
The median is 100 × 90 mm, and 30% are two-layer designs.
What is the most popular open source board using the USB2514B_Bi?
By GitHub stars, Archer mainboard by EI2030, with 40 stars.
Can I simulate one of these boards using the USB2514B_Bi before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.