1wire-4switch
About the 1wire-4switch PCB
1wire-4switch is an open source PCB design by InfernoEmbedded, published on GitHub. It is a 2-layer board measuring 65.5 × 59.4 mm, with 17 components from 9 distinct parts.
Other key parts include the DS2408S, 74HC04 and G3MB_SSR. By type, the board carries 6 ICs, 6 connectors, 2 relays and 1 capacitor.
It belongs with the sensors designs in this gallery.
From the project
Software, Firmware & Documentation is licensed under GPLv3
Software, Firmware & Documentation is licensed under GPLv3
The devices directory contains schematics, PCBs & firmware for the client devices.
Inferno Embedded commands allow the device to be rebooted into the bootloader so that they can be updated. The device can also be forced to remain in bootloader mode by shorting SWDAT on the SWD header to GND with a jumper.
Main components on the 1wire-4switch
1wire-4switch bill of materials (BOM)
17 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DS2408S | 1wire-SO16 | IC1 |
| 1 | 74HC04 | so-14 | U1 |
| 4 | G3MB_SSR | G3MB | U2, U3, U4, U5 |
| 2 | RJ45 | RJ45-8-Plastic | J1, J2 |
| 3 | CONN_4 | 2EDCK-5.08-4PIN | P1, P2, P4 |
| 1 | CONN_5_V | 2EDCK-5.08-5PIN | P3 |
| 2 | CONN_3 | PIN_ARRAY_3X1 | K1, K2 |
| 2 | 10K | 0603_Pack4 | RP1, RP2 |
| 1 | 100nF | c_0603 | C1 |
1wire-4switch design files
The KiCad project lives in the InfernoEmbedded/onewire-softdevice repository on GitHub; these links point at the commit this page was built from.
1wire-4switch: common questions
How big is the 1wire-4switch PCB?
The 1wire-4switch measures 65.5 × 59.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 1wire-4switch?
17 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the 1wire-4switch design files?
From the InfernoEmbedded/onewire-softdevice repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the 1wire-4switch design in my own project?
The repository has no license, so all rights stay with InfernoEmbedded. Use it as a reference, and ask the author before reusing the design.
More boards in onewire-softdevice
1 Wire Driver Board
88.3 × 48.3 mm66 parts2LNo license11
STM321Wire 8 Zone AC Controller
99.9 × 94.5 mm39 parts2LNo license11
STM321Wire-LEDController
99.8 × 99.8 mm35 parts2LNo license11
STM321Wire-Blank
99.8 × 99.8 mm35 parts2LNo license11
STM32ControlBoard
94.6 × 60.3 mm26 parts2LNo license11
STM321Wire 4 SSR Switch
46 × 91.3 mm25 parts2LNo license11
STM321Wire So Many Switches
192.9 × 41.3 mm20 parts2LNo license11
STM321Wire 16 Channel SSR Controller
45.1 × 44.7 mm18 parts2LNo license11
SoManySwitches-ClientBoard
19.9 × 27.4 mm8 parts2LNo license11
1wire roof module
59.4 × 31 mm4 parts2LNo license11
Inline SSR
17.2 × 30.5 mm4 parts2LNo license11
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956