HardLabs

USBC6PAdapterBoard

InfraredAces·GP2040-CE-projects·USBC6PAdapterBoard/kicad/USBC6PAdapterBoard.kicad_pcb

USBC6PAdapterBoard PCB layout, top view — open source RP2040/RP2350 board by InfraredAces

About the USBC6PAdapterBoard PCB

USBC6PAdapterBoard is an open source RP2040/RP2350 PCB design by InfraredAces, published on GitHub. It is a 2-layer board measuring 25 × 19.8 mm, with 4 components from 3 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. By type, the board carries 2 resistors, 1 IC and 1 connector.

From the project

Various GP2040-CE Hardware Projects and Accessories

Main components on the USBC6PAdapterBoard

RP2040

USBC6PAdapterBoard bill of materials (BOM)

4 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040
MX128-2.54-GN01-06P-CU-Y-A
U1
1
XY308-2.54-4P
CN1
2
5.1K
R1, R2

USBC6PAdapterBoard design files

The KiCad project lives in the InfraredAces/GP2040-CE-projects repository on GitHub; these links point at the commit this page was built from.

USBC6PAdapterBoard: common questions

What microcontroller does the USBC6PAdapterBoard use?

The USBC6PAdapterBoard is built around the RP2040, from the RP2040/RP2350 family.

How big is the USBC6PAdapterBoard PCB?

The USBC6PAdapterBoard measures 25 × 19.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the USBC6PAdapterBoard?

4 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the USBC6PAdapterBoard design files?

From the InfraredAces/GP2040-CE-projects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the USBC6PAdapterBoard design in my own project?

The repository has no license, so all rights stay with InfraredAces. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the USBC6PAdapterBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in GP2040-CE-projects

Similar boards