Ionos sdr mini
ionos-sdr·ionos-sdr-mini·CAD/ionosmini_1v0/ionosSDR_mini.kicad_pcb
About the Ionos sdr mini PCB
Ionos sdr mini is an open source ESP32 PCB design by ionos-sdr, published on GitHub. It is a 2-layer board measuring 168 × 80 mm, with 75 components from 32 distinct parts.
Its main chip is the ESP32-S3-DEVKITC-1-N8R2, from the ESP32 family. Other key parts include the LP5907MFX-3.3/NOPB. By type, the board carries 28 resistors, 12 capacitors, 8 jumpers, 8 test points, 7 switches and 3 connectors.
It belongs with the rf & radio, displays & leds and iot & wireless designs in this gallery.
From the project
Simplified version of the IonosSDR an ESP32+EFR32FG23 based low cost SDR with remote access option
Simplified, low-cost sibling of Ionos SDR: a carrier PCB that turns a stock Silicon Labs radio board into a usable SDR. An ESP32-S3 DevKitC sits on female headers on the left, a Silicon Labs radio board plugs into the mezzanine socket on the right, and both displays are optional. No custom RF design, no exotic parts — the radio board you already have in a drawer does the RF.

Main components on the Ionos sdr mini
Ionos sdr mini bill of materials (BOM)
75 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-DEVKITC-1-N8R2 | XCVR_ESP32-S3-DEVKITC-1-N8R2 | IC1 |
| 1 | LP5907MFX-3.3/NOPB LP5907MFX-3.3(SOT23-5) | SOT-23-5 | U1 |
| 2 | TFC-120-02-F-D-A-K-TR | TFC-120-02-XX-D-A-K-TR | CON1, CON2 |
| 1 | NA(SWD 1x6 2.54) | PinHeader_1x06_P2.54mm_Vertical | CON3 |
| 1 | ER-TFTM024-3 | ER-TFTM024-3_Socket_2x20_P2.54mm | DISP2 |
| 4 | M3 | PB_HOLE | H1, H2, H3, H4 |
| 8 | Bridged | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 |
| 6 | PTS647SK38SMTR2 LFS | PTS647SK38SMTR2LFS | SW1, SW2, SW3, SW4, SW5, SW6 |
| 1 | PTS647SK38SMTR2 LFS NA(PTS647SK38) | PTS647SK38SMTR2LFS | SW7 |
| 1 | 5V0 | TESTPOINT_40MIL_SMD | TP1 |
| 1 | 3V3 | TESTPOINT_40MIL_SMD | TP2 |
| 1 | 3V3_RADIO | TESTPOINT_40MIL_SMD | TP3 |
| 1 | VMCU_IN | TESTPOINT_40MIL_SMD | TP4 |
| 1 | GND | TESTPOINT_40MIL_SMD | TP5 |
| 1 | FG23_RDY | TESTPOINT_40MIL_SMD | TP6 |
| 1 | FG23_CMD | TESTPOINT_40MIL_SMD | TP7 |
| 1 | VRF_IN | TESTPOINT_40MIL_SMD | TP8 |
| 1 | OLED 4pin BLUE SSD1306 | 128x64OLED | DISP1 |
| 1 | BLM18SP300SH1D 600R@100MHz | L5_0603 | FB1 |
| 3 | 10uF/6.3V | CAPC1005X60_0402 | C1, C6, C11 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CL05A105KO5NNNC 1uF/16V/10% | CAPC1005X60_0402 | C2, C3 |
| 7 | GRM155R71H104KE14D 100nF/50V/10% | CAPC1005X60_0402 | C4, C5, C7, C8, C9, C10, C12 |
| 8 | CRCW04020000Z0EDC 0R | RESC1005X40_0402 | R1, R2, R3, R4, R5, R8, R16, R22 |
| 4 | CR0402AJW-472GAS 4.7k | RESC1005X40_0402 | R6, R7, R31, R32 |
| 4 | CRCW040210K0FKED 10k | RESC1005X40_0402 | R9, R28, R29, R30 |
| 2 | RT0402FRE072K2L 2.2k/1% | RESC1005X40_0402 | R17, R23 |
| 2 | RC0402FR-136K8L 6.8k/1% | RESC1005X40_0402 | R18, R34 |
| 1 | ERA-2AED223X 22k/1% | RESC1005X70_0402 | R19 |
| 2 | CRCW040210K0FKED 10k/1% | RESC1005X40_0402 | R20, R24 |
| 2 | CR0402-FX-1001GLF 1k | RESC1005X40_0402 | R21, R25 |
| 2 | CR0402AJW-472GAS NA(4.7k) | RESC1005X40_0402 | R26, R27 |
| 1 | CRCW04020000Z0EDC NA(0R) | RESC1005X40_0402 | R33 |
Ionos sdr mini design files
The KiCad project lives in the ionos-sdr/ionos-sdr-mini repository on GitHub; these links point at the commit this page was built from.
Ionos sdr mini: common questions
What microcontroller does the Ionos sdr mini use?
The Ionos sdr mini is built around the ESP32-S3-DEVKITC-1-N8R2, from the ESP32 family.
How big is the Ionos sdr mini PCB?
The Ionos sdr mini measures 168 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ionos sdr mini?
75 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ionos sdr mini design files?
From the ionos-sdr/ionos-sdr-mini repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ionos sdr mini design in my own project?
The repository has no license, so all rights stay with ionos-sdr. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ionos sdr mini without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k