USB DAC-AMP WITH TONE CTRL
ishaan-tam·USB_DAC-AMP·USB_DAC-AMP_WITH_TONE_CTRL/USB_DAC-AMP_WITH_TONE_CTRL.kicad_pcb
About the USB DAC-AMP WITH TONE CTRL PCB
USB DAC-AMP WITH TONE CTRL is an open source PCB design by ishaan-tam, published on GitHub. It is a 2-layer board measuring 52.1 × 9.3 mm, with 6 components from 6 distinct parts.
Other key parts include the TPS61040DBV, SPX3819M5-L and PCM2900C. By type, the board carries 4 ICs and 2 resistors.
It belongs with the audio designs in this gallery.
From the project
make sure that resistors are thin film, thich film resistors can introduce distortion Chose electrolytic caps in the signal path as long as they are large enough, if chosing ceramic (sepecially in the signal path) chose type cog, otehrwise most ceramic caps will have piezoelectri
make sure that resistors are thin film, thich film resistors can introduce distortion Chose electrolytic caps in the signal path as long as they are large enough, if chosing ceramic (sepecially in the signal path) chose type cog, otehrwise most ceramic caps will have piezoelectric effects and will introduce distortion bypass caps can be pretty much any type
For voltage ratings, useually go with double of what the expected DC voltage is ---
Main components on the USB DAC-AMP WITH TONE CTRL
USB DAC-AMP WITH TONE CTRL bill of materials (BOM)
6 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS61040DBV PCM2906 | SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 1 | SPX3819M5-L TPS61040DBV | SOT-23-5 | U2 |
| 1 | SPX3819M5-L | SOT-23-5 | U3 |
| 1 | PCM2900C SPX3819M5-L | SOT-23-5 | U4 |
| 1 | 240K PTN092-H20115K1A | TRIM_PTN092-H20115K1A | R3 |
| 1 | 1.5K PTN092-H20115K1A | TRIM_PTN092-H20115K1A | R4 |
USB DAC-AMP WITH TONE CTRL design files
The KiCad project lives in the ishaan-tam/USB_DAC-AMP repository on GitHub; these links point at the commit this page was built from.
USB DAC-AMP WITH TONE CTRL: common questions
How big is the USB DAC-AMP WITH TONE CTRL PCB?
The USB DAC-AMP WITH TONE CTRL measures 52.1 × 9.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB DAC-AMP WITH TONE CTRL?
6 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the USB DAC-AMP WITH TONE CTRL design files?
From the ishaan-tam/USB_DAC-AMP repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the USB DAC-AMP WITH TONE CTRL design in my own project?
The repository has no license, so all rights stay with ishaan-tam. Use it as a reference, and ask the author before reusing the design.
More boards in USB_DAC-AMP
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687