USB DAC-AMP
ishaan-tam·USB_DAC-AMP·USB_DAC-AMP/USB_DAC-AMP.kicad_pcb
About the USB DAC-AMP PCB
USB DAC-AMP is an open source PCB design by ishaan-tam, published on GitHub. It is a 4-layer board measuring 202.2 × 125 mm, with 113 components from 65 distinct parts.
Other key parts include the TPS61040DBV, SPX3819M5-L, PCM2900C and NE5532. By type, the board carries 46 capacitors, 39 resistors, 11 ICs, 7 diodes, 6 inductors and 2 connectors.
It belongs with the audio designs in this gallery.
From the project
make sure that resistors are thin film, thich film resistors can introduce distortion Chose electrolytic caps in the signal path as long as they are large enough, if chosing ceramic (sepecially in the signal path) chose type cog, otehrwise most ceramic caps will have piezoelectri
make sure that resistors are thin film, thich film resistors can introduce distortion Chose electrolytic caps in the signal path as long as they are large enough, if chosing ceramic (sepecially in the signal path) chose type cog, otehrwise most ceramic caps will have piezoelectric effects and will introduce distortion bypass caps can be pretty much any type
For voltage ratings, useually go with double of what the expected DC voltage is ---
Main components on the USB DAC-AMP
USB DAC-AMP bill of materials (BOM)
113 components, 65 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS61040DBV PCM2900C | SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 1 | SPX3819M5-L TPS61040DBV | SOT-23-5 | U2 |
| 1 | SPX3819M5-L | SOT-23-5 | U3 |
| 1 | PCM2900C SPX3819M5-L | SOT-23-5 | U4 |
| 7 | NE5532 | SOIC-8_5.3x5.3mm_P1.27mm | U5, U6, U7, U8, U9, U10, U11 |
| 1 | 12 MHz Crystal | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y3 |
| 1 | C5184243 USB_C_Receptacle | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | SJ-3524-SMT | SJ-3524-SMT | J2 |
| 1 | C20787 Polyfuse - 750mA | Fuse_0603_1608Metric_Pad1.05x0.95mm_HandSolder | F1 |
| 1 | SS14 D_TVS | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | 0603ESDA-18N | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | C316055 LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | C316055 SS14 | D_SMA | D4 |
| 1 | SS14 | D_SMA | D5 |
| 2 | C316055 D_TVS | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D6, D7 |
| 5 | 120R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | FB1, FB2, FB3, FB4, FB5 |
| 1 | 10U 10u | L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 3 | 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C11, C19 |
| 3 | 30p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C23, C46 |
| 3 | 10U 30p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C5, C6 |
Show 45 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 30P 30p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C43 |
| 1 | 100U 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
| 4 | 10U 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C17, C18, C22 |
| 4 | 30P 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10, C12, C13 |
| 1 | 1000u | CP_EIA-7343-43_Kemet-X_HandSolder | C14 |
| 1 | 30P 1000u | CP_EIA-7343-43_Kemet-X_HandSolder | C15 |
| 1 | 30P 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16 |
| 2 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C20, C21 |
| 3 | 100N 30p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C24, C33, C36 |
| 1 | 100N 100u | CP_EIA-7343-43_Kemet-X_HandSolder | C25 |
| 2 | 1000U 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C26, C38 |
| 2 | 100U 1000u | CP_EIA-7343-43_Kemet-X_HandSolder | C27, C35 |
| 1 | 30P 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C28 |
| 2 | 100U 2.2n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C29, C39 |
| 1 | 2.2N 100u | CP_EIA-7343-43_Kemet-X_HandSolder | C30 |
| 2 | 30P 100u | CP_EIA-7343-43_Kemet-X_HandSolder | C31, C40 |
| 2 | 100U 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C32, C44 |
| 1 | 100N 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C34 |
| 1 | 100N 100u | CP_EIA-7343-15_Kemet-W | C37 |
| 1 | 100U 100u | CP_EIA-7343-43_Kemet-X_HandSolder | C41 |
| 1 | 2.2N 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C42 |
| 1 | 100N 1000u | CP_EIA-7343-43_Kemet-X_HandSolder | C45 |
| 2 | 5.1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 1 | 240K PTN092-H20115K1A | TRIM_PTN092-H20115K1A | R3 |
| 1 | 5.1K 1M | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 5.1K 84.5K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 84.5K 22K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 4 | 22K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R25, R29, R39 |
| 1 | 22K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 240K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 2 | 5.1K 22K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R24 |
| 1 | 5.1K 20 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 4 | 22K 1.5k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R20, R28, R36 |
| 2 | 22K 22 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R15 |
| 3 | 1.5K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R26, R33 |
| 1 | 2.2 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17 |
| 1 | PTN092-H20115K1A 1.5k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21 |
| 1 | 1.5K 1M | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22 |
| 2 | 1.5K 22K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23, R34 |
| 3 | 1.5K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27, R38, R43 |
| 1 | 22K 5.1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R30 |
| 3 | 1 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R31, R41, R42 |
| 1 | 22K 1 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R32 |
| 1 | 5.1K 1.5K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R35 |
| 1 | 1.5K 5.1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R40 |
USB DAC-AMP design files
The KiCad project lives in the ishaan-tam/USB_DAC-AMP repository on GitHub; these links point at the commit this page was built from.
USB DAC-AMP: common questions
How big is the USB DAC-AMP PCB?
The USB DAC-AMP measures 202.2 × 125 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the USB DAC-AMP?
113 components, from 65 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the USB DAC-AMP design files?
From the ishaan-tam/USB_DAC-AMP repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the USB DAC-AMP design in my own project?
The repository has no license, so all rights stay with ishaan-tam. Use it as a reference, and ask the author before reusing the design.
More boards in USB_DAC-AMP
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687