BraccioPisteMCU stampa

ISS-Lab-Unibo·Agro_LoRaInductiveFruitGauge·Schematics and Gerbers/PCB pliers/Kicad project/BraccioPisteMCU_stampa.kicad_pcb

BraccioPisteMCU stampa PCB layout, top view — open source board by ISS-Lab-Unibo

About the BraccioPisteMCU stampa PCB

BraccioPisteMCU stampa is an open source PCB design by ISS-Lab-Unibo, published on GitHub. It is a 2-layer board measuring 132.7 × 119.2 mm, with 25 components from 18 distinct parts.

Other key parts include the LX3302AQPW-TR, MCP6541T-I/OT and LMT01DQX. By type, the board carries 9 connectors, 7 capacitors, 6 resistors and 3 ICs.

It belongs with the sensors designs in this gallery.

From the project

Design and production files of the inductive fruit gauge.

Design and production files of the inductive fruit gauge.

The gauge is a caliper with two arms joined at a pivot. A fruit held between the clips sets the opening angle α of the arms. The diameter is then:

where L is the arm length and Lclip* the length of the PETG clips. Both lengths are corrected for thermal expansion using the on-board temperature sensor.

The angle is measured without any contact by an inductive position sensor. The sensing arm carries one transmitting coil and two receiving coils, printed on the PCB. The other arm carries a copper target. The TX coil, resonating at…

Main components on the BraccioPisteMCU stampa

LX3302AQPW-TRMCP6541T-I/OTLMT01DQX

BraccioPisteMCU stampa bill of materials (BOM)

25 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LX3302AQPW-TR
IC1
1
MCP6541T-I/OT
MCP6541T-I_OT
IC2
1
LMT01DQX
U1
3
Conn_01x01_Pin
J1, J2, J3
1
U.FL-R-SMT-1_10_
Conn_01x01_Pin
J4
4
53398-0371
Conn_01x01_Pin
J5, J6, J7, J8
1
53398-0471
Conn_01x01_Pin
J9
1
100N
1n
C1
1
0.47U
100n
C2
1
100N
1u
C3
1
680p
C4
1
100N
680p
C5
1
4U7
100n
C6
1
100N
100n
C7
1
220
10k
R1
2
10k
R2, R3
2
10K
10k
R4, R5
1
2K2
56k
R6

BraccioPisteMCU stampa design files

The KiCad project lives in the ISS-Lab-Unibo/Agro_LoRaInductiveFruitGauge repository on GitHub; these links point at the commit this page was built from.

BraccioPisteMCU stampa: common questions

How big is the BraccioPisteMCU stampa PCB?

The BraccioPisteMCU stampa measures 132.7 × 119.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BraccioPisteMCU stampa?

25 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the BraccioPisteMCU stampa design files?

From the ISS-Lab-Unibo/Agro_LoRaInductiveFruitGauge repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the BraccioPisteMCU stampa design in my own project?

The repository has no license, so all rights stay with ISS-Lab-Unibo. Use it as a reference, and ask the author before reusing the design.

More boards in Agro_LoRaInductiveFruitGauge

Similar boards