LoRa Pinze Sent
ISS-Lab-Unibo·Agro_LoRaInductiveFruitGauge·Schematics and Gerbers/PCB sensor node/KiCad project/LoRa Pinze Sent.kicad_pcb
About the LoRa Pinze Sent PCB
LoRa Pinze Sent is an open source PCB design by ISS-Lab-Unibo, published on GitHub. It is a 6-layer board measuring 107 × 51 mm, with 212 components from 64 distinct parts.
Other key parts include the RAK3172-SiP, TPS613222ADBVR, SN74HCS151PWR, TCA9534PWR and TMUX1204DGSR. By type, the board carries 70 capacitors, 60 resistors, 25 ICs, 20 diodes, 14 connectors and 8 inductors.
It belongs with the rf & radio, power & battery and sensors designs in this gallery.
From the project
Design and production files of the LoRaWAN sensor node, internally called LoRa Pinze Sent, V1.1.
Design and production files of the LoRaWAN sensor node, internally called LoRa Pinze Sent, V1.1.
Channel mapping: gauge n (1–8) → J(8+n); analog input 1 → J8, 2 → J7, 3 → J6, 4 → J5.
Upload GERBER-LoRa Pinze Sent.zip to the PCB manufacturer (6 layers, 1.6 mm), then use the BOM and CPL files for assembly. Through-hole and mechanical parts that the assembler does not mount (battery/solar/coin-cell connectors, headers) are soldered by hand.
Main components on the LoRa Pinze Sent
LoRa Pinze Sent bill of materials (BOM)
212 components, 64 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RAK3172-SiP | RAK3172SiP | IC1 |
| 1 | TPS613222ADBVR | SOT95P280X145-5N | IC2 |
| 2 | SN74HCS151PWR | SOP65P640X120-16N | IC5, IC12 |
| 1 | TCA9534PWR | SOP65P640X120-16N | IC6 |
| 1 | TMUX1204DGSR | SOP50P490X110-10N | IC7 |
| 3 | TMUX1219DCKR | SOT65P210X110-6N | IC8, IC9, IC25 |
| 1 | USBLC6-2SC6 | SOT95P280X145-6N | IC10 |
| 1 | NCP115ASN330T2G | SOT95P275X110-5N | IC11 |
| 12 | TPS22917DBVR | SOT95P280X145-6N | IC13, IC14, IC15, IC16, IC17, IC18, IC19, IC20 +4 |
| 1 | BQ25570 | QFN-20-1EP_3.5x3.5mm_P0.5mm_EP2x2mm | U2 |
| 1 | CH340E | MSOP-10_3x3mm_P0.5mm | U3 |
| 1 | U.FL-R-SMT-1(10) U.FL-R-SMT-1_10_ | U.FL-R-SMT-1_10_ | J4 |
| 4 | 53398-0371 | 533980371 | J5, J6, J7, J8 |
| 8 | 53398-0471 | 533980471 | J9, J10, J11, J12, J13, J14, J15, J16 |
| 1 | GT-USB-7055BB | GTUSB7055BB | J17 |
| 1 | USER | TS046655BK160SMT | B1 |
| 1 | C5340119 Reset(Black) | TS046655BK160SMT | B2 |
| 1 | 100N 100n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | Cbyp1 |
| 1 | 10N 10n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | Cref1 |
| 1 | C327242 4,3M | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | Roc1 |
Show 44 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C159000 6,2M | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | Roc2 |
| 1 | 910K 910k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | Rok1 |
| 1 | C620473 6,8M | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | Rok2 |
| 1 | C30329 3,9M | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | Rok3 |
| 1 | C172186 8,2M | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | Rout1 |
| 1 | 4.7M | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | Rout2 |
| 1 | C137839 7,5M | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | Rov1 |
| 1 | C2929925 5,62M | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | Rov2 |
| 2 | KT-0603R | LEDC1608X70N | LED1, LED2 |
| 20 | BAV199 | SOT95P230X100-3N | D1, D2, D3, D4, D21, D22, D23, D24 +12 |
| 3 | BLM15HG102SN1D | NFZ15SG152SN10B | FB1, FB2, FB3 |
| 1 | MLZ2012N150LT000 | INDC2012X105N | L1 |
| 1 | DFE201612E-2R2M=P2 | 1286ASH1R0MP2 | L2 |
| 1 | LQW15AN8N2J00D | LQW15CNR20J00B | L3 |
| 1 | 744031220 | WE-TPC_381692 | L4 |
| 1 | 74479889310 | INDC2521X120N | L5 |
| 16 | 100N 100n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C3, C5, C7, C10, C11, C15, C20 +8 |
| 1 | 0.47U 0.47u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 27 | 1u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C8, C12, C13, C23, C39, C40, C43 +19 |
| 2 | 4U7 4u7 | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6, C9 |
| 1 | 100n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C14 |
| 1 | 4.7U 4.7u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C16 |
| 1 | 22U 22u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17 |
| 14 | 10P 10p | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C24, C37, C38, C44, C47, C51, C53, C56 +6 |
| 1 | 100P 100p | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C26 |
| 2 | 3.3P 3.3p | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C28, C29 |
| 1 | 10N 10n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C30 |
| 1 | C0805C475K9RACTU C0805C475K9RACTU 4,7u | C0805 | C31 |
| 1 | LMK212B7475KG-T | CAPC2012X135N | C32 |
| 1 | JMK212BJ226MG-T JMK212BJ226MG-T 22u | CAPC2013X135N | C33 |
| 1 | 220 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 3 | 10k | R_0402_1005Metric | R2, R11, R12 |
| 1 | 100R | R_0402_1005Metric | R3 |
| 4 | 10K 10k | R_0402_1005Metric | R4, R5, R9, R10 |
| 2 | 2K2 2k2 | R_0402_1005Metric | R6, R7 |
| 5 | 100K 100k | R_0402_1005Metric | R13, R14, R15, R24, R25 |
| 2 | 200K 200k | R_0402_1005Metric | R18, R19 |
| 4 | 10 | R_0402_1005Metric | R20, R21, R22, R23 |
| 2 | 33 | R_0402_1005Metric | R28, R29 |
| 1 | 220 | R_0402_1005Metric | R30 |
| 2 | 56K 56k | R_0402_1005Metric | R31, R32 |
| 16 | 12K 12k | R_0402_1005Metric | R47, R49, R51, R53, R55, R57, R59, R61 +8 |
| 16 | 22K 22k | R_0402_1005Metric | R48, R50, R52, R54, R56, R58, R60, R62 +8 |
| 1 | 1k | R_0402_1005Metric | R79 |
LoRa Pinze Sent design files
The KiCad project lives in the ISS-Lab-Unibo/Agro_LoRaInductiveFruitGauge repository on GitHub; these links point at the commit this page was built from.
LoRa Pinze Sent: common questions
How big is the LoRa Pinze Sent PCB?
The LoRa Pinze Sent measures 107 × 51 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the LoRa Pinze Sent?
212 components, from 64 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LoRa Pinze Sent design files?
From the ISS-Lab-Unibo/Agro_LoRaInductiveFruitGauge repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LoRa Pinze Sent design in my own project?
The repository has no license, so all rights stay with ISS-Lab-Unibo. Use it as a reference, and ask the author before reusing the design.
More boards in Agro_LoRaInductiveFruitGauge
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k