Neo-Interface
IstratieStefan·Neo-Interface
About the Neo-Interface PCB
Neo-Interface is an open source ESP32 PCB design by IstratieStefan, published on GitHub under the MIT license. It is a 2-layer board measuring 83.6 × 68 mm, with 32 components from 17 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the ESP32-DEVKITC. By type, the board carries 15 resistors, 6 connectors, 5 capacitors, 2 ICs, 2 switches and 2 diodes.
Main components on the Neo-Interface
Neo-Interface bill of materials (BOM)
32 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | ESP32-DEVKITC LD1117S33TR_SOT223 | SOT-223 | U2 |
| 3 | 1990067 | 1990067 | J1, J2, J3 |
| 1 | SCREW_TERMINAL_01X02 Conn_01x05_Socket | JST_XH_B5B-XH-AM_1x05_P2.50mm_Vertical | J4 |
| 1 | CONN_01X05_SOCKET USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J5 |
| 1 | Conn_02x10_Counter_Clockwise | PinHeader_2x10_P2.54mm_Vertical | J6 |
| 2 | SW_Push | SW_Tactile_SPST_Angled_PTS645Vx58-2LFS | SW1, SW2 |
| 2 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 3 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C4, C5 |
| 1 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 22uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 5 | 220 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5 |
| 3 | 4.7K 220 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R8 |
| 2 | 220 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10 |
| 3 | 5.1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R12, R13 |
| 1 | 470R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
Neo-Interface design files
The KiCad project lives in the IstratieStefan/Neo-Interface repository on GitHub; these links point at the commit this page was built from.
- LayoutSteering Wheel.kicad_pcb
- SchematicSteering Wheel.kicad_sch
- BOMBOM.csv
Neo-Interface: common questions
What microcontroller does the Neo-Interface use?
The Neo-Interface is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Neo-Interface PCB?
The Neo-Interface measures 83.6 × 68 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Neo-Interface?
32 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Neo-Interface design files?
From the IstratieStefan/Neo-Interface repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Neo-Interface design in my own project?
Yes, under the terms of its MIT license, which IstratieStefan chose for the repository.
Can I test firmware for the Neo-Interface without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k