RAPS-5
itsTasos·RAPS-5·hardware/RAPS-5_V1.kicad_pcb
About the RAPS-5 PCB
RAPS-5 is an open source PCB design by itsTasos, published on GitHub. It is a 4-layer board measuring 50 × 40 mm, with 83 components from 40 distinct parts.
Other key parts include the TPS54561DPRR, LTC4412ES6#TRPBF and TPS3808G01DBVR. By type, the board carries 28 capacitors, 25 resistors, 9 diodes, 7 transistors, 5 ICs and 4 inductors.
It belongs with the power & battery designs in this gallery.
From the project
Dual-input power module with independent LiPo protection, buck conversion and ideal-diode OR-ing.
RAPS-5 brings two independently protected LiPo inputs onto a common avionics power bus. Each path has its own fuse, reverse-polarity protection, transient suppression, input filtering and buck converter. Independent ideal-diode controllers combine the regulated outputs while blocking backfeed into an inactive path.
The result is a 50 × 40 mm, four-layer PCB with clearly labeled connectors, three voltage-status LEDs and accessible test points.

Main components on the RAPS-5
RAPS-5 bill of materials (BOM)
83 components, 40 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TPS54561DPRR | WSON-10-1EP_4x4mm_P0.8mm_EP2.6x3mm | U1, U101 |
| 2 | LTC4412ES6#TRPBF | TSOT-23-6 | U2, U102 |
| 1 | TPS3808G01DBVR | SOT-23-6 | U201 |
| 4 | DMP6023LE-13 DMP6023LE / 60V | SOT-223-3_TabPin2 | Q1, Q2, Q101, Q102 |
| 3 | 2N7002-7-F 2N7002 | SOT-23 | Q3, Q103, Q201 |
| 1 | 1727010 BAT A / 2S-6S | TerminalBlock_Phoenix_MKDS-1-2-3.81_1x02_P3.81mm_Horizontal | J1 |
| 1 | 1727010 BAT B / 2S-6S | TerminalBlock_Phoenix_MKDS-1-2-3.81_1x02_P3.81mm_Horizontal | J2 |
| 1 | 1727010 AVIONICS 5V / 3A | TerminalBlock_Phoenix_MKDS-1-2-3.81_1x02_P3.81mm_Horizontal | J3 |
| 2 | 0451005.MRL 5A / 125V | Fuse_Littelfuse-NANO2-451_453 | F1, F101 |
| 2 | BZT52H-C12 12V / BZT52H-C12 | D_SOD-123F | D1, D101 |
| 2 | SMBJ26CA SMBJ26CA / 600W | D_SMB | D2, D102 |
| 2 | STPS5L60U STPS5L60U / 5A 60V | D_SMB | D3, D103 |
| 1 | LTST-C190KGKT GREEN / PATH A OK | LED_0603_1608Metric | D4 |
| 1 | LTST-C190KGKT GREEN / PATH B OK | LED_0603_1608Metric | D104 |
| 1 | LTST-C190KGKT GREEN / OUTPUT OK | LED_0603_1608Metric | D201 |
| 2 | 742792410 60R@100MHz / 6A | L_1806_4516Metric | FB1, FB101 |
| 2 | XAL8080-103MED 10uH / XAL8080 | L_Coilcraft_XAL8080-XXX | L1, L101 |
| 2 | EEE-FK1H220P 22uF / 50V | CP_Elec_6.3x7.7 | C1, C101 |
| 4 | GRM32ER71H475KA88L 4.7uF / 50V X7R | C_1210_3225Metric | C2, C3, C102, C103 |
| 2 | GRM21BR71H225KA12L 2.2uF / 50V X7R | C_0805_2012Metric | C4, C104 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | GRM188R71C104KA01D 100nF / 16V | C_0603_1608Metric | C5, C11, C105, C111 |
| 4 | GRM32ER61C476KE15L 47uF / 16V X5R | C_1210_3225Metric | C6, C7, C106, C107 |
| 2 | GRM188R71E103KA01D 10nF / 25V | C_0603_1608Metric | C8, C108 |
| 2 | GRM188R71E223KA01D 22nF / 25V | C_0603_1608Metric | C9, C109 |
| 2 | GRM1885C1H221JA01D 220pF / 50V C0G | C_0603_1608Metric | C10, C110 |
| 1 | 10SVPF220M 220uF / 10V polymer | CP_Elec_8x6.7 | C201 |
| 2 | GRM31CR61C226KE15L 22uF / 16V X5R | C_1206_3216Metric | C202, C203 |
| 1 | 100nF / 16V | C_0603_1608Metric | C204 |
| 2 | 1nF / 50V | C_0603_1608Metric | C205, C206 |
| 2 | RC0603FR-0747KL 47k | R_0603_1608Metric | R1, R101 |
| 5 | 100k | R_0603_1608Metric | R2, R9, R102, R109, R204 |
| 2 | 22k | R_0603_1608Metric | R3, R103 |
| 2 | 249k | R_0603_1608Metric | R4, R104 |
| 1 | 55.0k 0.1% | R_0603_1608Metric | R5 |
| 3 | 10.0k 0.1% | R_0603_1608Metric | R6, R106, R202 |
| 2 | 10.0k | R_0603_1608Metric | R7, R107 |
| 3 | 10k | R_0603_1608Metric | R8, R108, R203 |
| 3 | 2.2k | R_0603_1608Metric | R10, R110, R205 |
| 1 | 54.4k 0.1% | R_0603_1608Metric | R105 |
| 1 | 112k 0.1% | R_0603_1608Metric | R201 |
RAPS-5 design files
The KiCad project lives in the itsTasos/RAPS-5 repository on GitHub; these links point at the commit this page was built from.
RAPS-5: common questions
How big is the RAPS-5 PCB?
The RAPS-5 measures 50 × 40 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the RAPS-5?
83 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the RAPS-5 design files?
From the itsTasos/RAPS-5 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the RAPS-5 design in my own project?
The repository has no license, so all rights stay with itsTasos. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k