16 open source boards using the LTC4412ES6#TRPBF
Real designs built with the LTC4412ES6#TRPBF, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Cm4 motherboard
Twisted-Fields
118 × 117 mm238 parts4LNo license81OreSat Solar Module - Silicon Cells + MCXN
oresat
83 × 100 mm122 parts4LNo license25ESP32
PCB-Modular-Multi-Protocol-Hub
MbFredys
79.7 × 63.1 mm208 parts4LCERN-OHL-W-2.07Klayout macos release
New-Seagull-Work-Inc
150 × 140 mm59 parts2LCustom license6AVR/Arduino
MPPT
aati106
90.4 × 69.6 mm93 parts2LNo license2Klayout linux release
raulizahi
150 × 140 mm59 parts2LCustom license2Klayout windows release
New-Seagull-Work-Inc
150 × 140 mm59 parts2LCustom license2ESP32
Wooden Clock - main board
tibm110 × 110 mm183 parts4LNo license1STM32
Oresat batteries
BrownSpaceEngineering
88 × 84.9 mm304 parts4LNo license0AVR/Arduino
Atmega328-enclosure tamper alarm
manhoosbilli1
100 × 60 mm83 parts2LNo license0RAPS-5
itsTasos
50 × 40 mm83 parts4LNo license0Klayout linux release
New-Seagull-Work-Inc
150 × 140 mm59 parts2LCustom license0- schematic only · 262 partsRaspberry Pi
Pcb qa
xxsahanaxx
262 partsNo license0 STM32
1u panel
oresat
83 × 100 mm109 parts2LNo license25OreSat Solar Module - GaAs + MCXN
oresat
83 × 100 mm84 parts4LNo license25Oresat C3 Surrogate
oresat
99.8 × 94.6 mm36 parts2LNo license1
How designs wire the LTC4412ES6#TRPBF
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the LTC4412ES6#TRPBF connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a capacitor to GND on 11 of 13 designs, most often 47 µF (then 100 nF).
- The VIN pin has a series resistor on 9 of 13 designs, most often 475 kΩ (then 4.7 kΩ).
- The CTL pin is tied to GND on 8 of 13 designs (a signal on 5).
- The SENSE pin has a capacitor to GND on 6 of 13 designs, most often 470 µF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: TPS61088RHLR 31%, a connector 23% · V_BAT 23% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| CTLpin 3 | Connected to: GND 62% · a signal 38% | — |
| SENSEpin 6 | Connected to: A connector 46% · 5V 46% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Cm4 motherboard by Twisted-Fields, 1u panel by oresat, PCB-Modular-Multi-Protocol-Hub by MbFredys and Klayout macos release by New-Seagull-Work-Inc.
The LTC4412ES6#TRPBF in open source designs
The gallery holds 16 open source boards using the LTC4412ES6#TRPBF from 14 GitHub repositories; a typical one measures about 99.8 × 100 mm and carries around 89 components.
53% are two-layer designs, the rest use four layers or more, and 6% carry an open source license.
The most starred is Cm4 motherboard by Twisted-Fields.
Parts used alongside the LTC4412ES6#TRPBF
Microcontrollers on boards using the LTC4412ES6#TRPBF
What boards using the LTC4412ES6#TRPBF are built for
LTC4412ES6#TRPBF: common questions
Where can I find a LTC4412ES6#TRPBF reference design?
Each of the 16 boards on this page is a real design using the LTC4412ES6#TRPBF. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LTC4412ES6#TRPBF VIN pin connected?
The VIN pin has a capacitor to GND on 11 of 13 designs, most often 47 µF (then 100 nF). Counted from the KiCad layouts of 13 open source designs using the LTC4412ES6#TRPBF.
How is the LTC4412ES6#TRPBF CTL pin connected?
The CTL pin is tied to GND on 8 of 13 designs (a signal on 5). Counted from the KiCad layouts of 13 open source designs using the LTC4412ES6#TRPBF.
How is the LTC4412ES6#TRPBF SENSE pin connected?
The SENSE pin has a capacitor to GND on 6 of 13 designs, most often 470 µF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the LTC4412ES6#TRPBF.
What parts are used alongside the LTC4412ES6#TRPBF?
The AP63205WU-7, BQ25171QWDRCRQ1, LM76003RNPT, TPS61088RHLR and ADS1115IDGSR appear in the most repositories here.
Which microcontrollers do boards using the LTC4412ES6#TRPBF use?
Most are built on AVR/Arduino (2), ESP32 (2), Raspberry Pi (2) and STM32 (2).
How big is a typical board using the LTC4412ES6#TRPBF?
The median is 99.8 × 100 mm, and 53% are two-layer designs.
What is the most popular open source board using the LTC4412ES6#TRPBF?
By GitHub stars, Cm4 motherboard by Twisted-Fields, with 81 stars.
Can I simulate one of these boards using the LTC4412ES6#TRPBF before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.