Transmit-Receive
About the Transmit-Receive PCB
Transmit-Receive is an open source ESP32 PCB design by Jack-Cb, published on GitHub. It is a 4-layer board measuring 35.5 × 36.9 mm, with 13 components from 10 distinct parts.
Its main chip is the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family. By type, the board carries 5 capacitors, 3 connectors, 3 resistors, 1 IC and 1 diode.
From the project
Documentation, resources, code, schematics, pcb layouts, and all related materials for the 3-Axis Coil ECE project at Oregon State University.
Main components on the Transmit-Receive
Transmit-Receive bill of materials (BOM)
13 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1U-N16R8 | XCVR_ESP32-S3-WROOM-1U-N16R8 | U1 |
| 1 | 10118194-0001LF | AMPHENOL_10118194-0001LF | J1 |
| 1 | Conn_01x04 | JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J2 |
| 1 | Conn_01x02 | JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J3 |
| 1 | D_Zener | SOD123_DIO | D1 |
| 2 | 0.1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3 |
| 1 | 22u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 2 | NC | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5 |
| 1 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 2 | 22 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
Transmit-Receive design files
The KiCad project lives in the Jack-Cb/Team-Jaxis-3-Axis-Coil repository on GitHub; these links point at the commit this page was built from.
Transmit-Receive: common questions
What microcontroller does the Transmit-Receive use?
The Transmit-Receive is built around the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family.
How big is the Transmit-Receive PCB?
The Transmit-Receive measures 35.5 × 36.9 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Transmit-Receive?
13 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Transmit-Receive design files?
From the Jack-Cb/Team-Jaxis-3-Axis-Coil repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Transmit-Receive design in my own project?
The repository has no license, so all rights stay with Jack-Cb. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Transmit-Receive without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Team-Jaxis-3-Axis-Coil
PowerBlock
51.5 × 32.7 mm44 parts2LNo license0
Motherboard
64.1 × 88.9 mm34 parts2LNo license0
Motherboard2.0
67 × 74.5 mm28 parts6LNo license0
PowerConditioning
29.2 × 42.9 mm22 parts2LNo license0
Capstone Signal Processing
35.5 × 36.9 mm19 parts4LNo license0
CoilArrayBlock
32.7 × 21.8 mm14 parts2LNo license0
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3k
ESP32Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Badge
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Racer
36 × 50.2 mm70 parts4LApache-2.03.8k