Microgrow
JakeWesta·microgrow·Documentation/PCB 3.0 (beta/Beta/Beta.kicad_pcb
About the Microgrow PCB
Microgrow is an open source ESP32 PCB design by JakeWesta, published on GitHub. It is a 2-layer board measuring 52 × 74.5 mm, with 30 components from 15 distinct parts.
Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. By type, the board carries 8 resistors, 4 transistors, 1 IC, 1 diode and 1 capacitor.
It belongs with the iot & wireless, displays & leds and sensors designs in this gallery.
From the project
Micro-Grow repo.
- Flutter app demo video: https://www.youtube.com/watch?v=zIg6AqKC-sg
Main components on the Microgrow
Microgrow bill of materials (BOM)
30 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DEVKIT-V1 | ESP32-C3-DevKitM-1 | U1 |
| 4 | AO3400 | SOT-23 | Q1, Q2, Q3, Q4 |
| 1 | Conn_01x03 | PinHeader_1x03_P1.00mm_Vertical | BUS_A1 |
| 1 | Conn_01x04 | PinHeader_1x04_P1.00mm_Vertical | BUS_B1 |
| 1 | ~ | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | DHT_1 |
| 1 | Fan | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | FAN1 |
| 1 | ~ | 1x08(2 and 6) vertical JST PH | LCD_1 |
| 2 | ~ | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | LED_STRIP1, WATER_1 |
| 3 | SW_Push | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | MISC1, PWR_BUTTON1, WIFI1 |
| 3 | ~ | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | MISTER_1, PUMP_1, PUMP_2 |
| 2 | Conn_01x02 | JST_VH_B2P-VH_1x02_P3.96mm_Vertical | PWR1, PWR_DAISY1 |
| 1 | SS14 | D_SOD-123 | D1 |
| 1 | 100nF | C_0402_1005Metric | C1_0402_100nF1 |
| 4 | 100 | R_0402_1005Metric | R1, R3, R5, R7 |
| 4 | 100k | R_0402_1005Metric | R2, R4, R6, R8 |
Microgrow design files
The KiCad project lives in the JakeWesta/microgrow repository on GitHub; these links point at the commit this page was built from.
Microgrow: common questions
What microcontroller does the Microgrow use?
The Microgrow is built around the ESP32-DEVKIT-V1, from the ESP32 family.
How big is the Microgrow PCB?
The Microgrow measures 52 × 74.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Microgrow?
30 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Microgrow design files?
From the JakeWesta/microgrow repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Microgrow design in my own project?
The repository has no license, so all rights stay with JakeWesta. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Microgrow without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k