AeroBot
Jane-Anne-dev·AeroBot·KiCad/AeroBot/AeroBot.kicad_pcb.kicad_pcb
About the AeroBot PCB
AeroBot is an open source ESP32 PCB design by Jane-Anne-dev, published on GitHub. It is a 2-layer board measuring 120 × 61 mm, with 8 components from 5 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. By type, the board carries 4 switches, 3 connectors and 1 IC.
It belongs with the displays & leds designs in this gallery.
From the project
this is for my half life progression
Aerobot is a personal desk buddy. It can be any shape, the goal is to be creative. I t has a motion sensor which allows aerobot to know if tis being moved around. shake it and its face moves! ## What it is It sits on your desk as a companion. You can assign different functions with the buttons and you can play with it if you're bored.
It is inspired by the starbie, here is the repository: https://github.com/SharKingStudios/Starbie/blob/main/README.md?plain=1 it is equiped with a guide which i followed.
Main components on the AeroBot
AeroBot bill of materials (BOM)
8 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C3-SMD | U1 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | CONN_01X08_PIN Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J6 |
| 4 | SW_Push | SW_PUSH_6mm | SW2, SW3, SW4, SW5 |
AeroBot design files
The KiCad project lives in the Jane-Anne-dev/AeroBot repository on GitHub; these links point at the commit this page was built from.
AeroBot: common questions
What microcontroller does the AeroBot use?
The AeroBot is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the AeroBot PCB?
The AeroBot measures 120 × 61 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AeroBot?
8 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AeroBot design files?
From the Jane-Anne-dev/AeroBot repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the AeroBot design in my own project?
The repository has no license, so all rights stay with Jane-Anne-dev. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the AeroBot without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k