Hack-Life

Jasjot-singh7·Hack-Life

Hack-Life PCB layout, top view — open source ESP32 board by Jasjot-singh7

About the Hack-Life PCB

Hack-Life is an open source ESP32 PCB design by Jasjot-singh7, published on GitHub. It is a 2-layer board measuring 46.5 × 41.9 mm, with 7 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

From the project

A USB MIDI controller built around a bare RP2040 chip, with big, bouncy arcade buttons instead of stiff keyboard switches. One finger plays a full four-note chord, and a physical toggle switch turns on Scale-Lock mode so you can't hit a wrong note.

A USB MIDI controller built around a bare RP2040 chip, with big, bouncy arcade buttons instead of stiff keyboard switches. One finger plays a full four-note chord, and a physical toggle switch turns on Scale-Lock mode so you can't hit a wrong note.

- Arcade buttons: 6 key buttons plus 1 big bass kick button, wired to the board with 2-pin connectors - Chord mode: custom firmware where 1 finger = 4 notes - Scale-Lock toggle: a hardware switch that restricts playing to one musical scale, so every note sounds right - Indicator LED: shows when Scale-Lock is on - USB-C: plug-and-play USB MIDI, no…

Hack-Life, from the project README
From the project README

Main components on the Hack-Life

Hack-Life bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
DHT11
U1
1
XIAO-ESP32-C3-SMD
U2
1
Conn_01x04_Pin
J1
1
Conn_01x08_Pin
J2
2
SW_Push
SW1, SW2
1
10k
R1

Hack-Life design files

The KiCad project lives in the Jasjot-singh7/Hack-Life repository on GitHub; these links point at the commit this page was built from.

Hack-Life: common questions

What microcontroller does the Hack-Life use?

The Hack-Life is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Hack-Life PCB?

The Hack-Life measures 46.5 × 41.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hack-Life?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Hack-Life design files?

From the Jasjot-singh7/Hack-Life repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Hack-Life design in my own project?

The repository has no license, so all rights stay with Jasjot-singh7. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Hack-Life without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards