Shematic for power and light system
jasmehar·Smart_motorcycle_helmet·KiCAD files (PCB design)/Round 4/Helmet/shematic for power and light system.kicad_pcb
About the Shematic for power and light system PCB
Shematic for power and light system is an open source ESP32 PCB design by jasmehar, published on GitHub. It is a 2-layer board measuring 95.1 × 53.1 mm, with 35 components from 20 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N16R2, from the ESP32 family. Other key parts include the LP2950-3.3_TO252. By type, the board carries 12 resistors, 5 transistors, 4 capacitors, 3 switches, 3 LEDs and 2 ICs.
From the project
Design report until i get the notebook
Main components on the Shematic for power and light system
Shematic for power and light system bill of materials (BOM)
35 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N16R2 | ESP32-S3-WROOM-1_EXP | U1 |
| 1 | LP2950-3.3_TO252 | LP3_TEX | U2 |
| 3 | IRLZ44N | PG-TO220-3_INF | Q1, Q4, Q5 |
| 2 | SS8050-G | SOT-23 | Q2, Q3 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10118194_Horizontal | J1 |
| 1 | Conn_01x02 | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | +12V1 |
| 1 | LED | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | BlueTooth1 |
| 1 | Conn_01x04 | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | Buck_Converter1 |
| 1 | SolderJumper_3_Open | SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | SW_DIP_x01 | SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW1 |
| 2 | SW_Push | SW_SPST_B3S-1000 | SW2, SW3 |
| 3 | Conn_01x02 | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | LED1, LED2, LED3 |
| 1 | SP0503BAHT | SOT-143 | D1 |
| 2 | 1u | C_0805_2012Metric | C2, C3 |
| 1 | 10u | C_0805_2012Metric | C4 |
| 1 | 100n | C_0805_2012Metric | C5 |
| 4 | 10000 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R11, R12 |
| 2 | 1k | R_0805_2012Metric | R3, R6 |
| 4 | 10k | R_0805_2012Metric | R4, R5, R7, R8 |
| 2 | 100k | R_0805_2012Metric | R9, R10 |
Shematic for power and light system design files
The KiCad project lives in the jasmehar/Smart_motorcycle_helmet repository on GitHub; these links point at the commit this page was built from.
Shematic for power and light system: common questions
What microcontroller does the Shematic for power and light system use?
The Shematic for power and light system is built around the ESP32-S3-WROOM-1-N16R2, from the ESP32 family.
How big is the Shematic for power and light system PCB?
The Shematic for power and light system measures 95.1 × 53.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Shematic for power and light system?
35 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Shematic for power and light system design files?
From the jasmehar/Smart_motorcycle_helmet repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Shematic for power and light system design in my own project?
The repository has no license, so all rights stay with jasmehar. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Shematic for power and light system without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Smart_motorcycle_helmet
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k