9 open source boards using the LP2950-3.3_TO252

Real designs built with the LP2950-3.3_TO252, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the LP2950-3.3_TO252

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LP2950-3.3_TO252 connects to, and the resistors, capacitors and other passives placed on it.

  • The VO pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 4.7 µF).
  • The VI pin has a decoupling capacitor on 3 of 5 designs, most often 1 µF (then 2.2 µF).
VIpin 1Connected to: 5V 60% · a signal 40%
  • Decoupling capacitor on 60% · 1 µF (1), 2.2 µF (1), 100 nF (1)
GNDpin 2Connected to: GND 100%
VOpin 3Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 1 µF (2), 4.7 µF (1), 100 nF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pwm-2420-lus by LibreSolar, A1 - Analogue Board by DumberThanUsual, Atmo monitor by gpgreen and Shematic for power and light system by jasmehar.

The LP2950-3.3_TO252 in open source designs

The gallery holds 9 open source boards using the LP2950-3.3_TO252 from 5 GitHub repositories; a typical one measures about 98 × 85 mm and carries around 57 components.

100% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.

The most starred is Pwm-2420-lus by LibreSolar.

Microcontrollers on boards using the LP2950-3.3_TO252

What boards using the LP2950-3.3_TO252 are built for

LP2950-3.3_TO252: common questions

Where can I find a LP2950-3.3_TO252 reference design?

Each of the 9 boards on this page is a real design using the LP2950-3.3_TO252. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LP2950-3.3_TO252 VO pin?

The VO pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the LP2950-3.3_TO252.

What decoupling capacitors do designs use on the LP2950-3.3_TO252 VI pin?

The VI pin has a decoupling capacitor on 3 of 5 designs, most often 1 µF (then 2.2 µF). Counted from the KiCad layouts of 5 open source designs using the LP2950-3.3_TO252.

Which microcontrollers do boards using the LP2950-3.3_TO252 use?

Most are built on STM32 (7) and ESP32 (2).

How big is a typical board using the LP2950-3.3_TO252?

The median is 98 × 85 mm, and 100% are two-layer designs.

What is the most popular open source board using the LP2950-3.3_TO252?

By GitHub stars, Pwm-2420-lus by LibreSolar, with 17 stars.

Can I simulate one of these boards using the LP2950-3.3_TO252 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part