Solder test
About the Solder test PCB
Solder test is an open source PCB design by JasMoH, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 14.7 × 15.2 mm, with 8 components from 8 distinct parts.
Other key parts include the lmp7721. By type, the board carries 4 resistors, 2 capacitors, 1 IC and 1 connector.
From the project
Photoacoustic spectroscopy
Main components on the Solder test
Solder test bill of materials (BOM)
8 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | lmp7721 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U6 |
| 1 | RF_Shield_One_Piece | SMS-201 | J17 |
| 1 | 0.1u | C_0805 | C35 |
| 1 | 10pF | C_0805 | C36 |
| 1 | 100M | R_0805 | R55 |
| 1 | 0 | R_0805 | R57 |
| 1 | 10K | R_0805 | R60 |
| 1 | 100 | R_0805 | R64 |
Solder test design files
The KiCad project lives in the JasMoH/Photoacoustic repository on GitHub; these links point at the commit this page was built from.
Solder test: common questions
How big is the Solder test PCB?
The Solder test measures 14.7 × 15.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Solder test?
8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Solder test design files?
From the JasMoH/Photoacoustic repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Solder test design in my own project?
Yes, under the terms of its GPL-3.0 license, which JasMoH chose for the repository.
