ADA842X BREAKOUT BOARD
JasMoH·Photoacoustic·instrumentation amp bob/inst_amp.kicad_pcb
About the ADA842X BREAKOUT BOARD
ADA842X BREAKOUT BOARD is an open source PCB design by JasMoH, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 36.6 × 21.6 mm, with 42 components from 17 distinct parts.
Other key parts include the AD8429 and OP1177. By type, the board carries 17 capacitors, 7 resistors, 6 diodes, 6 inductors, 3 connectors and 2 ICs.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Photoacoustic spectroscopy
Main components on the ADA842X BREAKOUT BOARD
ADA842X BREAKOUT BOARD bill of materials (BOM)
42 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AD8429 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | OP1177 | MSOP-8-1EP_3x3mm_Pitch0.65mm | U2 |
| 1 | Conn_01x03 | Pin_Header_Angled_1x03_Pitch2.54mm | J1 |
| 1 | Conn_01x04 | Pin_Header_Angled_1x04_Pitch2.54mm | J2 |
| 1 | Conn_01x05 | Pin_Header_Angled_1x05_Pitch2.54mm | J3 |
| 1 | POT | Potentiometer_Trimmer_Bourns_PV36W | RV1 |
| 4 | D | D_0805 | D1, D2, D3, D6 |
| 2 | LED | D_0805 | D4, D5 |
| 4 | L | L_0805_HandSoldering | L1, L2, L3, L6 |
| 2 | 10uH | L_0805_HandSoldering | L4, L5 |
| 4 | C | C_0805_HandSoldering | C1, C2, C3, C4 |
| 4 | 0.1u | C_0805_HandSoldering | C5, C6, C7, C8 |
| 3 | 10u | CP_Radial_D5.0mm_P2.00mm | C9, C10, C11 |
| 6 | 0.1uF | C_0805_HandSoldering | C12, C13, C14, C15, C16, C17 |
| 5 | R | R_0805_HandSoldering | R1, R2, R5, R6, R7 |
| 1 | 10K | R_0805_HandSoldering | R3 |
| 1 | 30K | R_0805_HandSoldering | R4 |
ADA842X BREAKOUT BOARD design files
The KiCad project lives in the JasMoH/Photoacoustic repository on GitHub; these links point at the commit this page was built from.
ADA842X BREAKOUT BOARD: common questions
How big is the ADA842X BREAKOUT BOARD?
The ADA842X BREAKOUT BOARD measures 36.6 × 21.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ADA842X BREAKOUT BOARD?
42 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ADA842X BREAKOUT BOARD design files?
From the JasMoH/Photoacoustic repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the ADA842X BREAKOUT BOARD design in my own project?
Yes, under the terms of its GPL-3.0 license, which JasMoH chose for the repository.
More boards in Photoacoustic
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979