LIA
JasMoH·Photoacoustic·lock_in_amplifier/LIA_Build/LIA.kicad_pcb
About the LIA PCB
LIA is an open source PCB design by JasMoH, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 290.9 × 87.4 mm, with 295 components from 130 distinct parts.
Other key parts include the LM833, 74HC4040, lmp7721, AD8429 and OP1177. By type, the board carries 106 resistors, 60 capacitors, 44 connectors, 41 test points, 13 ICs and 13 diodes.
From the project
Photoacoustic spectroscopy
Main components on the LIA
LIA bill of materials (BOM)
295 components, 130 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM833 | SOIC-8-N | U1 |
| 1 | 74HC4040 | TSSOP-16_4.4x5mm_Pitch0.65mm | U5 |
| 1 | lmp7721 | MSOP-8-1EP_3x3mm_Pitch0.65mm | U6 |
| 3 | LM833 | SO-8_5.3x6.2mm_Pitch1.27mm | U7, U12, U16 |
| 1 | AD8429 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U8 |
| 1 | OP1177 | MSOP-8-1EP_3x3mm_Pitch0.65mm | U9 |
| 1 | 74HC4046A | SOIC-16_3.9x9.9mm_Pitch1.27mm | U10 |
| 2 | ADA2200 | TSSOP-20_4.4x6.5mm_Pitch0.65mm | U11, U13 |
| 1 | MCP6566 | SOT-23-5 | U14 |
| 1 | MC74LCX16374 | TSSOP-48_6.1x12.5mm_Pitch0.5mm | U15 |
| 2 | DMN640L | SOT-23 | Q1, Q2 |
| 1 | vref-in | tyco_RCU_0603_Probe_Pad | J1 |
| 1 | vref | tyco_RCU_0603_Probe_Pad | J2 |
| 1 | V-IN | tyco_RCU_0603_Probe_Pad | J3 |
| 1 | GND | tyco_RCU_0603_Probe_Pad | J4 |
| 1 | V+IN | tyco_RCU_0603_Probe_Pad | J5 |
| 1 | +5V | tyco_RCU_0603_Probe_Pad | J6 |
| 1 | +3V3 | tyco_RCU_0603_Probe_Pad | J7 |
| 1 | -5V | tyco_RCU_0603_Probe_Pad | J8 |
| 1 | B IN COAX | SMA_THT_Jack_Straight | J9 |
Show 110 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | A IN COAX | SMA_THT_Jack_Straight | J10 |
| 1 | B IN | Pin_Header_Straight_1x02_Pitch2.54mm | J11 |
| 1 | POWER_IN | Pin_Header_Straight_1x03_Pitch2.54mm | J12 |
| 1 | A IN | Pin_Header_Straight_1x02_Pitch2.54mm | J13 |
| 1 | I IN COAX | SMA_THT_Jack_Straight | J14 |
| 1 | I IN | Pin_Header_Straight_1x02_Pitch2.54mm | J15 |
| 1 | TEST SIGNAL OUT | Pin_Header_Straight_1x01_Pitch1.00mm | J16 |
| 2 | RF_Shield_One_Piece | SMS-201 | J17, J38 |
| 1 | TEST HIGH SIDE VALUE | Pin_Header_Straight_2x05_Pitch2.54mm | J18 |
| 1 | +3V3 OUT | tyco_RCU_0603_Probe_Pad | J19 |
| 1 | AMP OUT | Pin_Header_Straight_1x02_Pitch2.54mm | J20 |
| 1 | AMP OUT COAX | SMA_THT_Jack_Straight | J21 |
| 1 | CLK IN | Pin_Header_Straight_1x02_Pitch2.54mm | J22 |
| 1 | CLK IN COAX | SMA_THT_Jack_Straight | J23 |
| 2 | BOOT | tyco_RCU_0603_Probe_Pad | J24, J39 |
| 2 | VOCM | tyco_RCU_0603_Probe_Pad | J25, J42 |
| 1 | CLK OUT | Pin_Header_Straight_1x02_Pitch2.54mm | J26 |
| 1 | CLK OUT COAX | SMA_THT_Jack_Straight | J27 |
| 2 | DEMOD PROG | Pin_Header_Straight_1x04_Pitch2.54mm | J28, J34 |
| 2 | XOUT | tyco_RCU_0603_Probe_Pad | J29, J48 |
| 1 | DEMOD OUT - I | Pin_Header_Straight_1x02_Pitch2.54mm | J30 |
| 1 | DEMOD OUT I COAX | SMA_THT_Jack_Straight | J31 |
| 1 | DEMOD OUT Q COAX | SMA_THT_Jack_Straight | J32 |
| 1 | DEMOD OUT - Q | Pin_Header_Straight_1x02_Pitch2.54mm | J33 |
| 2 | rst | Pin_Header_Straight_1x02_Pitch2.54mm | J35, J45 |
| 1 | DELAY SEL FINE | Pin_Header_Straight_1x10_Pitch2.54mm | J36 |
| 1 | DELAY SEL COARSE | Pin_Header_Straight_1x05_Pitch2.54mm | J37 |
| 1 | -5V OUT | tyco_RCU_0603_Probe_Pad | J46 |
| 1 | +5V OUT | tyco_RCU_0603_Probe_Pad | J47 |
| 1 | TEST LOW VALUE SELECT | Pin_Header_Straight_1x03_Pitch2.54mm | S1 |
| 1 | MID AMP GAIN SEL | SPDT_OS102011MS2QN1 | S2 |
| 1 | REF V SEL | SPDT_OS102011MS2QN1 | S3 |
| 1 | A / I SEL | SPDT_OS102011MS2QN1 | S4 |
| 1 | B SEL | SPDT_OS102011MS2QN1 | S5 |
| 1 | LNA GAIN SEL | SPDT_OS102011MS2QN1 | S6 |
| 1 | MAG SEL | SP4T_C&K_SS-14D0839-VG | S7 |
| 1 | MULT SEL | SP3T_CK_SS-14D0839-VG | S8 |
| 1 | LINE FIL SEL | SPDT_OS102011MS2QN1 | S9 |
| 1 | END AMP GAIN FB | tyco_RCU_0603_Probe_Pad | TP1 |
| 1 | MID AMP OUT | tyco_RCU_0603_Probe_Pad | TP2 |
| 1 | GAIN AMP REF | tyco_RCU_0603_Probe_Pad | TP3 |
| 1 | HIGH GAIN AMP OUT | tyco_RCU_0603_Probe_Pad | TP4 |
| 1 | CURRENT GUARD | tyco_RCU_0603_Probe_Pad | TP5 |
| 1 | CURRENT GUARD FB | tyco_RCU_0603_Probe_Pad | TP6 |
| 1 | LNA OUT | tyco_RCU_0603_Probe_Pad | TP7 |
| 1 | TIA GUARD BUFF IN | tyco_RCU_0603_Probe_Pad | TP8 |
| 1 | TIA REF | tyco_RCU_0603_Probe_Pad | TP9 |
| 1 | OVERLOAD IND | tyco_RCU_0603_Probe_Pad | TP10 |
| 1 | TIAV+ | tyco_RCU_0603_Probe_Pad | TP11 |
| 1 | GBUFFOUT | tyco_RCU_0603_Probe_Pad | TP12 |
| 1 | TIA_OUT | tyco_RCU_0603_Probe_Pad | TP13 |
| 1 | GBUFV- | tyco_RCU_0603_Probe_Pad | TP14 |
| 1 | GBUFFV+ | tyco_RCU_0603_Probe_Pad | TP15 |
| 1 | TIAV- | tyco_RCU_0603_Probe_Pad | TP16 |
| 1 | CLK-IN-MIDPOINT | tyco_RCU_0603_Probe_Pad | TP17 |
| 1 | PC1 | tyco_RCU_0603_Probe_Pad | TP18 |
| 1 | VCO-IN | tyco_RCU_0603_Probe_Pad | TP19 |
| 1 | PC2 | tyco_RCU_0603_Probe_Pad | TP20 |
| 1 | PCP | tyco_RCU_0603_Probe_Pad | TP21 |
| 1 | F/64 | tyco_RCU_0603_Probe_Pad | TP22 |
| 1 | DEMOD - N - I | tyco_RCU_0603_Probe_Pad | TP23 |
| 1 | INH | tyco_RCU_0603_Probe_Pad | TP24 |
| 1 | DEM_OUT | tyco_RCU_0603_Probe_Pad | TP25 |
| 1 | PC3 | tyco_RCU_0603_Probe_Pad | TP26 |
| 1 | SIGCON_OUT | tyco_RCU_0603_Probe_Pad | TP27 |
| 1 | F - COUNT | tyco_RCU_0603_Probe_Pad | TP28 |
| 1 | DEMOD - N - Q | tyco_RCU_0603_Probe_Pad | TP29 |
| 1 | F/32 | tyco_RCU_0603_Probe_Pad | TP30 |
| 1 | F/2 | tyco_RCU_0603_Probe_Pad | TP31 |
| 1 | COARL CLK IN | tyco_RCU_0603_Probe_Pad | TP32 |
| 1 | FMOD IN | tyco_RCU_0603_Probe_Pad | TP33 |
| 1 | FINE CLK IN | tyco_RCU_0603_Probe_Pad | TP34 |
| 1 | F/4 | tyco_RCU_0603_Probe_Pad | TP35 |
| 1 | F/16 | tyco_RCU_0603_Probe_Pad | TP36 |
| 1 | F/128 | tyco_RCU_0603_Probe_Pad | TP37 |
| 1 | C1A | tyco_RCU_0603_Probe_Pad | TP38 |
| 1 | C1B | tyco_RCU_0603_Probe_Pad | TP39 |
| 1 | R2 | tyco_RCU_0603_Probe_Pad | TP40 |
| 1 | R1 | tyco_RCU_0603_Probe_Pad | TP41 |
| 3 | LED | D_0805 | D1, D2, D3 |
| 6 | BAT54S | SOT-23 | D4, D9, D10, D11, D12, D13 |
| 2 | D | D_0805 | D5, D6 |
| 2 | LED | LED_0805 | D7, D8 |
| 7 | 10uH | L_0805_HandSoldering | L1, L2, L3, L4, L5, L6, L7 |
| 3 | 10u | CP_Radial_D5.0mm_P2.00mm | C1, C2, C5 |
| 25 | 0.1u | C_0805 | C3, C4, C20, C21, C22, C23, C24, C26 +17 |
| 18 | 0.1uF | C_0805 | C6, C7, C8, C9, C10, C11, C12, C13 +10 |
| 4 | 10pF | C_0805 | C25, C27, C36, C40 |
| 1 | 200pF | C_0805 | C34 |
| 4 | C | C_0805 | C39, C45, C46, C60 |
| 4 | 270P | C_0805 | C41, C42, C43, C44 |
| 1 | 100PF | C_0805 | C47 |
| 20 | 10k | R_0805 | R1, R2, R13, R17, R30, R38, R39, R41 +12 |
| 24 | 0 | R_0805 | R3, R4, R5, R6, R15, R56, R57, R61 +16 |
| 17 | 100 | R_0805 | R7, R8, R9, R32, R33, R34, R43, R44 +9 |
| 1 | 1 | R_0805 | R10 |
| 1 | .1 | R_0805 | R11 |
| 9 | 100k | R_0805 | R12, R16, R24, R25, R29, R37, R40, R53 +1 |
| 7 | 1k | R_0805 | R14, R18, R22, R26, R27, R31, R42 |
| 9 | 1M | R_0805 | R19, R20, R23, R28, R36, R48, R55, R73 +1 |
| 1 | 6.04 | R_0805 | R21 |
| 1 | 1G | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R35 |
| 6 | 10M | R_0805 | R49, R50, R67, R68, R69, R70 |
| 4 | R | R_0805 | R59, R66, R83, R106 |
| 1 | 200 | R_0805 | R78 |
| 1 | MMA02040C1005FB300 0 Vishay Beyschlag | R_0805 | R101 |
| 1 | MMA02040C1502FB300 0 Vishay Beyschlag | R_0805 | R102 |
| 1 | MMA02040C1000FB300 0 Vishay Beyschlag | R_0805 | R103 |
| 1 | RNX038200MFKEL 0 Vishay Dale | R_0805 | R104 |
| 1 | SMM02040D1001BB300 R Vishay Draloric | R_0805 | R105 |
LIA design files
The KiCad project lives in the JasMoH/Photoacoustic repository on GitHub; these links point at the commit this page was built from.
LIA: common questions
How big is the LIA PCB?
The LIA measures 290.9 × 87.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LIA?
295 components, from 130 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LIA design files?
From the JasMoH/Photoacoustic repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the LIA design in my own project?
Yes, under the terms of its GPL-3.0 license, which JasMoH chose for the repository.